Results 1 to 3 of 3
Thread: Scalloped Pattern
Threaded View
-
12-27-2001, 12:50 PM #3Registered User Promoted
- Join Date
- Aug 1999
- Posts
- 6,414
If I understand correctly, you want a pattern for scalloped shingles to go with the cedar shingle textures that is viewable w/o rendering ..... when you define materials, in the pattern tab click the Select Pattern button then browse to the pattern folder (default being C:\Program Files\ART\Chief70\Patterns\) and open the Chiefarc.pat file then in the Entries drop down select Roof-G...set the scale to 1, then in the General tab set the size to around 12 ......you may want to adjust these values to get the size you want in your elevations..
You need two wall types one for the lower wall and another for the scalloped wall, if you have already created them ....then....You need to simply go to the attic and change the auto-generated wall to wall type you want, then check the retain attic wall box...and close....you can adjust the break line on these wall types in an elevation....
Tim O'Donnell