Results 1 to 15 of 28
Thread: Swayback Gable Roof?
Hybrid View
-
01-20-2014, 08:10 AM #1
Registered User Promoted
- Join Date
- Mar 2006
- Location
- Ashland, OR
- Posts
- 1,386
Segment angle is controlled in the roof DBX.
-
01-20-2014, 04:39 PM #2
Duh! Or as Homer would say, Doh! You know, I tried tinkering with the Segment Angle setting but in all the excitement of seeing a workable solution to my problem I had a severe brain cramp and neglected to remove my visible straight exterior walls from the plan view so that the auto build roof feature could use the invisible curved exterior walls to generate the roof profile. Once I came to my senses I was able to generate a quite acceptable swayback gable roof. Now, thankfully, I can send that weird taco shaped roof plane that I generated in SketchUp to the recycle bin. I don’t know how you came up with your “curved wall” approach Bill (talk about thinking outside of the box)? I doubt I would have ever stumbled across it as my tunnel vision was focused solely on working within the “Build Roof” and “Roof Plane Specification” dialog boxes. Anyhow, I am much obliged to you and everybody that chimed in on the topic.
My Homebuilt Rig:
Intel DZ77GA-70K Extreme MB with Intel Core i7-3770K Quad Core CPU @ 3.5GHz
Power Supply - Corsair Professional Series AX750
Applications Drive – Intel 335 Series 240GB SSD
Data Drive – Western Digital Velociraptor 600GB
Memory – Corsair Vengeance 32 GB DDR3 1600MHz
Video - NVIDIA Quadro 4000 2GB GDDR5
Monitors - 2 Dell U3014 30”
My Software:
Windows 7 Ultimate 64 bit
CA X6 Build: 16.1.1.9x64
Home Designer Pro 2014
SolidWorks 2012-2013-2014
AutoCAD 2005–2006
-
01-20-2014, 07:53 PM #3
Registered User Promoted
- Join Date
- Mar 2006
- Location
- Ashland, OR
- Posts
- 1,386
I might also mention that this process is very useful for oriental roof lines with a flared prow. This can be done very effectively with an elliptical wall.
See this thread: http://www.chieftalk.com/showthread....liptical+walls