Results 1 to 11 of 11
Thread: Terrian mental block wall
-
09-30-2005, 10:41 AM #1Registered User Promoted
- Join Date
- Apr 2005
- Location
- SD CA
- Posts
- 55
Terrian elevations
Last edited by sbok5150; 10-04-2005 at 12:39 PM.
-
09-30-2005, 12:18 PM #2
Sean,
Your picture isn't posting - but I might know what you're asking.
Here's how I get terrain elevations to behave. I learned it from Steve, who knows everything!
1 - When you make your terrain perimeter, open it up and uncheck "auto calculate elevation", and set it to zero.
2 - in the Terrain Configuration child tools: choose Terrain Elevation Tools, then the Elevation Line child. Draw contour lines like you would see on a topographic site plan. If your garage floor is at -12", have a line going pretty much straight across the garage doors, and set that line at -12". Set the heights of your other elevation lines by how far above or below your finished first floor they should be. You'll get perfect grade heights every time.
By the way, Dermot told me that for best results, use fewer lines, not more. I was loading up on many lines, and it turns out a few strategically placed is better. With too many too close together, I used to get crossed polyline errors.
Wendy
-
10-04-2005, 12:41 PM #3Registered User Promoted
- Join Date
- Apr 2005
- Location
- SD CA
- Posts
- 55
Wendy tried your tips but still cant figure it out maybe pic will help for better answer
-
10-04-2005, 01:29 PM #4
Sean,
Does that drive go up to a retaining wall? Pull the retaining wall back and the drive will drop down,
...and Wendy is right less is better when doing terrain.Last edited by louis; 10-04-2005 at 02:13 PM.
-
10-04-2005, 04:12 PM #5
Will this work?
-
10-04-2005, 05:31 PM #6
...or put the road over the creek.
-
10-05-2005, 12:38 AM #7
You might want to do as Louis did in making a simpler plan for practice with the terrain tools till you get the right combination of modifiers, retaining walls and elevation data figured out and then transfer that new understanding to your main plan. Successful practice will lead to certainty for you.
DJP
David Jefferson Potter
Chief Architect ® Trainer, Beta Tester, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Win7 Ultimate x64 & XP Pro x32, 500 Gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
Chief 7-X6, Home Designer versions 7-2014
3101 Shoreline Drive #2118, Austin, Texas 78728-4446
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel
Help is just an e mail or call away!
-
10-11-2005, 09:00 AM #8Registered User Promoted
- Join Date
- Apr 2005
- Location
- SD CA
- Posts
- 55
Well Louis your pic looks great, but for my situationn that back retaining wall must stay there the only part of the terrian that is lower or goes lower is just the drive way. Everything else must stay at the street level.
Thank you again Sean
-
10-11-2005, 11:57 AM #9Registered User Promoted
- Join Date
- Mar 2004
- Posts
- 97
Louis!
I can't believe you forgot the culvert!www.van-con.com
-
10-11-2005, 01:40 PM #10
It's in there you just can't see it. High water.
-
10-11-2005, 08:02 PM #11
Then have your retaining wall but make it a regular block wall (not a retaining wall that effects the terrain) and try that. There is always a solution and usually more than one.
DJP
David Jefferson Potter
Chief Architect ® Trainer, Beta Tester, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Win7 Ultimate x64 & XP Pro x32, 500 Gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
Chief 7-X6, Home Designer versions 7-2014
3101 Shoreline Drive #2118, Austin, Texas 78728-4446
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel
Help is just an e mail or call away!