Results 1 to 4 of 4
-
10-06-2005, 03:44 PM #1Registered User Promoted
- Join Date
- Sep 2004
- Location
- Bunbury WA Australia
- Posts
- 12
gable not centred over gable wall.
Ive just draw my first house in Chief. It was of the plan I posted earlier concerning the raised roof. Im having trouble getting the gable to centre. Also it needs a valley to the left hand side to match the valley on the right hand side. The ceiling where the gable is , is raised 1' 6". I have got that bit right. Ive fixed the front wall of the bay to gable.
Ive attached 2 plans showing this problem. Any help would be appreciated.
Also does anyone know where i can get a 3' finial o put on the gable en? They are similar shape to some of the posts/ballusters on Chief symbols.
Thanksghassan
-
10-06-2005, 03:46 PM #2Registered User Promoted
- Join Date
- Sep 2004
- Location
- Bunbury WA Australia
- Posts
- 12
heres the floor plan
Heres the floor plan.
ghassan
-
10-06-2005, 03:54 PM #3Mouse Pusher
- Join Date
- Jan 2005
- Posts
- 802
Your roof baseline needs to match the roof. It extends past the point of the gable.
-
10-06-2005, 05:47 PM #4Member-Cliff Cain
- Join Date
- Oct 2004
- Location
- Denton, TX
- Posts
- 4,311
One other thing you might try is setting your min. alcove to a small setting (Build Roof dbx) and rebuild roof. Make sure you don't lose your manual roofs! Copy the plan first and play with it.
Cliff
X6
Vista Home Premium SP-2
Gateway FX6800-01e
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
7.00 GB RAM DDR 3........64-bit OS
NVIDIA GeForce GTS 250/PCIe/SSE2 1024 MB Memory