Results 1 to 4 of 4
Threaded View
-
12-17-2012, 11:58 PM #2
twincreeks:
Please study up on how to create different wall definitions in the manual. All the information you should need is there. If you are using X5 and have SSA, watch all the videos on walls. Also, study up on pony walls ... where you can have one type of material on a wall over a different material below it. Learn how to place breaks in a wall so that you can have a different material showing on one side of the break and a different material on the other side (I believe this may be what you need to do to answer your question above). If you are still having trouble after doing the research I am recommending, come back here again and ask for more help. Good luck.Curt Johnson
X5
Puget Systems Custom Computer, Win 7 Pro 64-bit SP1, 3.3Ghz Intel Core i5 2500K Quad, 8 GB Kingston DDR3-1333 Ram, Intel X25-M 80 GB SSD App Drive, WD 500 GB Caviar Blue SATA 6 Gb/s Data Drive, EVGA GeForce GTX 550 Ti 1024MB VC, Antec 650W PS, Asus p8P67 Pro REV 3.0 Motherboard