Wood Floor Missing Under Doors

[Glenn Woodward]

Thanks Glenn,

but that is what I did first.

Chris,

I used X3 and it worked.
Do you have Auto Rebuild walls/Floors/Ceilings turned on?

[Dave Pitman]

Glenn, I have "auto..." on, and I get the gap in X3, so?

Chris,

I lowered the floor to match the existing (default) height, and then re-raised it the 36", and it cleared up.

(In X3)

--

[Chris Brown]

Dave Potter, no kidding? And Yes, I am using X3

Dave Pittman, thanks.

[Glenn Woodward]

Glenn, I have "auto..." on, and I get the gap in X3, so?

Chris,

I lowered the floor to match the existing (default) height, and then re-raised it the 36", and it cleared up.

(In X3)

--

Dave,

The only reason I asked about Rebuild was if he changed the floor heights in the dbx and auto rebuild wasn't on, he wouldn't see the changes.

I got it to work without changing the floor levels back to zero, just re-entering them at 36" fixed it for me.

[Dave Pitman]

I got it to work without changing the floor levels back to zero, just re-entering them at 36" fixed it for me.

Glenn,

I initially skimmed over your first post and so I didn't tie your "rebuild" comment to the other instruction.

You are correct. I tried again just re-entering 36", and sure enough, that did it.

Odd behavior, to be sure.

[Chris Brown]

Probably something that should have been caught and fixed in X3 but oh well sounds like it is fixed in forward versions.

Thanks for your help.