Results 1 to 8 of 8
-
10-09-2012, 07:02 PM #1Registered User Promoted
- Join Date
- Oct 2012
- Posts
- 17
Trying to make a gate at the end of a deck (full width)
This is actually a bridge, and I am trying to put a gate (12ft wide) at the end.
However, I cannot make the gate wider than half way across the bridge.
I am using x4.
I made the deck, I added a rail all the way across and then inserted a door, I tried to make it wider, but could not
Thanks!
Mc
-
10-10-2012, 04:21 AM #2
Can you send a screenshot?
AMD X6 -16gb DDR3 - HD 2x 160GB SATA HD 1x 500GB SATA- AMD FirePro V8800 - Windows 7 64bits
-
10-10-2012, 04:21 AM #3
Mc,
Might want to post the plan. CLose it, zip it up and post. If it is too big
strip it of most items and then save as seperate plan and zip.Dennis Gavin CR, CKBR
Gavin Design-Build
Media, PA.
610-353-8890
X5
-
10-10-2012, 12:47 PM #4Registered User Promoted
- Join Date
- Oct 2012
- Posts
- 17
It is 33mb zipped. I know how to HIDE LAYERS, but how do I strip stuff out?
(hey, I am a newbie...)
Thanks!
-
10-10-2012, 01:05 PM #5
MC,
Delete anything not necessary to fixing/visualizing the problem. lights, furniture, trees, rooms etc. Notice I say delete not turn off layers. Then save as a new name so you still have your original plan.Dennis Gavin CR, CKBR
Gavin Design-Build
Media, PA.
610-353-8890
X5
-
10-10-2012, 01:50 PM #6
I had no problem doing this:
Joseph P. Carrick, Architect - AIA
ASUS M51AC Desktop, core i7-4770 CPU @3.4 GHZ, 16 GB Ram, NVidea GT640 with60M with 3GB GM, 30" HiRes (2560/1600) Monitor , (2) 24" ASUS Monitors
Windows 8.1
Chief Architect 9, 10, X1, X3, X4 Premium, X5 Premium, X6 Premium
-
10-11-2012, 01:03 PM #7Registered User Promoted
- Join Date
- Oct 2012
- Posts
- 17
This led me to the issue! Thanks!
I had another wall that I could not see.
Thanks!
Mc
-
12-23-2012, 01:02 AM #8Registered User Promoted
- Join Date
- Dec 2012
- Posts
- 2