Results 1 to 4 of 4
Thread: Missing Toggle to Layout
-
10-20-2004, 03:53 AM #1
Missing Toggle to Layout
Hi All,
Used to be, when working with an open layout, I was able to toggle from the plan file to the layout file with a button that perched below the "fill window" button on the Chief 9.5 toolbar. Sometime after downloading version update 9.54, I find that button missing and would like to have it back. Has anyone experienced this? Is there a fix? Thanks DanDL Drafting, Sedalia, Missouri
Chief Version X2 12.5.1.9
Windows XP Professional
Liquid Cooled QX9650 Xtreme 3.85 ghz 1800 rated FSB
2 X WD150GB 10000 RPM Raptors RAID 0/
2 X 500 GB WD 7200 RPM RAID 1
Asus P5E3 Deluxe Mainboard with WiFi Ap
XFX Nvidia GeForce 9800 X2 Dual 512 mb Driver 180.48
4 GB Corsair DDR3 - 1333 Mhz RAM
Cooler Master Real Power Pro 1,000 Watt PS
-
10-20-2004, 04:08 AM #2
I have not experienced that problem. I normally just use CTRL TAB. Will let you toggle between layout and model drawing.
Hope this helps.
-
10-20-2004, 06:47 AM #3
Dan,
The only thing I can think of is it may be off the screen to the right. I've had that happen before and had to bring the zoom tools to the left to have it show up.
HTH
-
10-20-2004, 06:59 AM #4
Missing Layout Toggle Button
Ben and David,
Thanks for the information. I like the "control tab" feature. Didn't know about it. It's faster. Thanks, DanDL Drafting, Sedalia, Missouri
Chief Version X2 12.5.1.9
Windows XP Professional
Liquid Cooled QX9650 Xtreme 3.85 ghz 1800 rated FSB
2 X WD150GB 10000 RPM Raptors RAID 0/
2 X 500 GB WD 7200 RPM RAID 1
Asus P5E3 Deluxe Mainboard with WiFi Ap
XFX Nvidia GeForce 9800 X2 Dual 512 mb Driver 180.48
4 GB Corsair DDR3 - 1333 Mhz RAM
Cooler Master Real Power Pro 1,000 Watt PS