Results 1 to 2 of 2
Thread: Missing walls attic/dormers
-
09-16-1999, 10:56 AM #1Registered User Promoted
- Join Date
- Sep 1999
- Location
- Prince Edward Island, Canada
- Posts
- 1
Missing walls attic/dormers
Help help......(Chief 97)Pent/200
Problem 1
When I do a Cape cod/1 1/2 story plan and use "0" for ceiling height the interior walls will not appear (on this level only) in cross section view.Also when I create exterior overview the wall areas of any dormer will not show in any elevation but a window frame will. The windows on the gable end walls show as only a rectangler outline but no window appears.
Problem 2
Any time I use the cross buck style door from the door library my system crashes...???
Also if I move a angled wall at its intersection with two walls the system crashes......???
------------------
-
09-16-1999, 11:50 AM #2Registered User Promoted
- Join Date
- Aug 1999
- Location
- Louisville, KY USA
- Posts
- 224
The walls don't show because they are 0" high. After your roofs are built change your ceiling ht to 60 or 72 or 96 and rebuild floors and ceilings. You really need a kneewall - set the eaves at 1 1/2 -plate thickness, the interiors at 96". set the dormer exterior walls to main layer 1. Build floors and ceilings.
Go to Berryvale software and read up on the tech diary - there is a section on dormers, etc.
http://www.berryvalesoftware.com/cadiary.html
Charlie