Results 1 to 5 of 5
-
04-08-2010, 09:00 AM #1Registered User Promoted
- Join Date
- Jan 2006
- Location
- Bozeman, Montana
- Posts
- 471
Move a wall intersection a tiny amount
I have a section of invisible wall that I need to move a small amount. This is really stumping me. see the attached jpg. Im sure this is easy, can anyone help?
current CA version X3
-
04-08-2010, 09:07 AM #2
try holding the ctrl key while moving the wall
or if you know the distance to be moved, start to drag the wall then hit the tab key and enter the amount
you can start the move by moving the wall a "larger" distance and chief will move it just the little bit that you need
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
04-08-2010, 09:58 AM #3
The problem is the walls keep snapping together I bet.
Pull the other wall back so you snap the invisible one to the line first,
Then the other wall should stop there to...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
04-08-2010, 10:01 AM #4
or turn Object snaps off (and grid snaps ?)
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
04-08-2010, 01:07 PM #5
Lew
I've had that situation a few times and it can drive you nuts..
Easier if you know where you want to stop it to use the cad line and snap one wall to that first.
I'm sure there are other ways to make it work, that's the way I use without having to think about it...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4