Results 1 to 4 of 4
Thread: ceiling plane lines on layout
-
11-18-2009, 07:39 AM #1Registered User Promoted
- Join Date
- Nov 2007
- Posts
- 8
ceiling plane lines on layout
I am using Chief XI and have found that the lines that the program generates to delineate the line at which the underside of the roof plane intersects the ceiling plane cannon be removed from a layout view through the layer on/off controls. What layer does this information reside on?
The workaround is to change all the rooms to "no ceiling" structure, but this shouldn't be necessary.
Am I missing something here?
ErnieErnie Bayles, ARCHITECT
Ithaca, NY
-
11-18-2009, 08:19 AM #2
~ Believe it is the Walls,Beam layer that will turn off other displays not needing to be turned off - has always needed its own layer but for whatever reason stays the same....
-
11-18-2009, 08:31 AM #3Registered User Promoted
- Join Date
- Nov 2007
- Posts
- 8
thanks Mike, that would be the answer
eErnie Bayles, ARCHITECT
Ithaca, NY
-
11-18-2009, 08:34 AM #4
NOTE: X2, changed this to the "ceiling lines" layer
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)