Results 16 to 30 of 79
Thread: x1.4 noted problems
-
01-14-2008, 03:18 PM #16
Interior walls where the dimensions could not reach an exterior wall worked fine (if that has any relevance) - A wall that was selected near the perimeter of floor plan instead of having perpendicular measurements had only parallel dimensions similar to "show wall length" - wasn't consistent but when occurs they are useless. Otherwise usable temp.dimensions is a dream come true. - - also saw where the temps. went outside of floor plan, to nowhere, as described and wondered a bit about that also? - everything otherwise is just fine . . .
Last edited by BREEZE WOOD; 01-14-2008 at 03:23 PM.
-
01-14-2008, 03:37 PM #17
I never get the interrior side of an Exterior wall regardless my settings.
Ash Shaker
Architect
Ash Tree Architecture
Elkridge, MD, USA
CA X5
-
01-14-2008, 05:06 PM #18Originally Posted by AshSarah Mitchell
-
01-14-2008, 06:43 PM #19Acad free at last
- Join Date
- Feb 2005
- Location
- Bayport, NY
- Posts
- 303
Keith - thank you for the reply. I have edited my thread starter.
Spark already knows that we have trouble with the temp dim and the interior wall. Looking forward to that getting fixed.
The problem I am having with the "S" key I noticed yesterday under the following condition:
Take a vector view of a model - top view and export to cad with patterns intact. Place a joist direction block (I've used for three years without incident) and it will snap to the pattern, No big deal, but then try to copy that block over and hold down the "s" key but it will not stop snapping to the thousands of points on the roofing pattern.
Hope that helps.
Allen - are you not able to reproduce this either? If it's just me then I guess it's just me.Rich C. SDSInc
Bayport, NY
X5
Windows 7 64
Alienware 17" Laptop - full time use - 14GB
i7 3720QM
Nvidia GTX 675M - 2GB
-
01-14-2008, 07:25 PM #20Member-Cliff Cain
- Join Date
- Oct 2004
- Location
- Denton, TX
- Posts
- 4,311
I get the same Rich. Holding down the S key, while in Cad Detail from View, does not stop the snapping (Skip Snaps).
Cliff
X6
Vista Home Premium SP-2
Gateway FX6800-01e
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
7.00 GB RAM DDR 3........64-bit OS
NVIDIA GeForce GTS 250/PCIe/SSE2 1024 MB Memory
-
01-24-2008, 02:23 PM #21Special Projects Director
- Join Date
- May 2003
- Posts
- 3,113
The 11.4.1.7 update should address several of these issues.
Dan Park,
Special Projects Director,
Chief Architect
-
01-24-2008, 02:44 PM #22
x1.4
Hi All:
Just wanted to chime in to applaud the folks at CA for this update. In many ways, it's better than some of the upgrades I've purchased in the past! I am really happy with the product now, and I'm doing things with CA (like townhouses) that I never thought would be so easy.
I'm still trying to learn all of the new features and fixes, but so far, it rocks!
Seeya,
Chris Allen
Architect
Austin, TX
-
01-24-2008, 03:49 PM #23Member-Cliff Cain
- Join Date
- Oct 2004
- Location
- Denton, TX
- Posts
- 4,311
Originally Posted by Dan ParkCliff
X6
Vista Home Premium SP-2
Gateway FX6800-01e
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
7.00 GB RAM DDR 3........64-bit OS
NVIDIA GeForce GTS 250/PCIe/SSE2 1024 MB Memory
-
01-24-2008, 04:40 PM #24Originally Posted by louisSarah Mitchell
-
01-26-2008, 05:47 PM #25Registered User Promoted
- Join Date
- Aug 2003
- Location
- Mountain View, CA
- Posts
- 2,970
Maybe this is similar to Louis' temp dim. problem...
If I click on an exterior wall, it will show temp. dims on the outside of the building, but not on the interior. So in the attached example, I want to move the exterior wall at the top of the picture to make the room interior a certain dimension. It doesn't give me a dimension to work with. And if I click one of the exterior walls to the right or left, it dimensions from the outside to outside only.
And I can't find any combination of settings in the "temp dim prefs" dbx to fix this. So for the moment, I have to draw a manual dim. when I need to adjust an exterior wall based on an interior criteria.
Christina
-
01-27-2008, 04:54 AM #26
Christina, what I do is "shift A" for all dimensions and this will give a dimension from the horiz int wall to the rear horiz ext wall and then I can use that dimension to move ext wall. And if I am not mistaken if a wall is dimensioned already via manual or auto dim. a temp dimension will not pop up. Is that so
-scott
-
01-27-2008, 03:25 PM #27And if I am not mistaken if a wall is dimensioned already via manual or auto dim. a temp dimension will not pop up. Is that so
-
01-28-2008, 09:05 AM #28Originally Posted by cgirerdSarah Mitchell
-
01-28-2008, 09:09 AM #29
Oh boy.
Now I'm going to have to take some time to show you a thing or two.
The trouble is I really don't have time. I will try to come up with something.
-
01-28-2008, 10:17 AM #30Originally Posted by cgirerdSarah Mitchell