Results 1 to 6 of 6
Thread: polyline solids
-
09-17-2004, 01:32 PM #1
polyline solids
Does anyone know how to rotate a polyline solid
Your privacy is important to us, your personal details will handled discreetly, and will not be shared with anyone except the CIA, FSB, MI6 or similar, then they will be placed on a USB stick and left on a bus.
-
09-17-2004, 02:59 PM #2
Should rotate like any polyline box (plan view or elevation)....can you be more specific?
-
09-17-2004, 03:09 PM #3Registered User Promoted
- Join Date
- Jul 2001
- Location
- Battle Ground, WA
- Posts
- 11
Polyline solids
Have found that in plan view you can rotate on one axis, and in section view you can rotate about the other axis.
Hope this helps.
Paul S.
-
09-17-2004, 06:23 PM #4
The only way I know is to make a symbol and rotate in the symbol creator. You can spin it but I don't think that is what you want.
David Eastman
Eastman Builders
10803 Gulfdale
San Antonio TX 78216
Ph. 210-842-4037
Fax 210-485-1364
David@Eastmanbuilders.com
-
09-18-2004, 11:45 PM #5
I need to make a polyline with circular profile and then rotate it 45 deg. My plan was to use"'Crossroads ,but when I öpen the DXF there is nothing to see.
Your privacy is important to us, your personal details will handled discreetly, and will not be shared with anyone except the CIA, FSB, MI6 or similar, then they will be placed on a USB stick and left on a bus.
-
09-19-2004, 11:12 AM #6Registered User Promoted
- Join Date
- Aug 1999
- Location
- Ridgway, Colorado, USA
- Posts
- 2,917
Originally posted by ARCHIJEF2000
I need to make a polyline with circular profile and then rotate it 45 deg. My plan was to use"'Crossroads ,but when I öpen the DXF there is nothing to see.
One other thing. When I open a dwg or dxf, exported from Chief, in AutoCAD in most cases I must use the "View Extents" tool to se it properly.Last edited by Larry Kumpost; 09-19-2004 at 11:15 AM.
Larry
Lawrence C. Kumpost, Architect
No matter how much you push the envelope, it'll still be
stationery.