Results 1 to 3 of 3
Thread: Larry
-
01-31-2014, 11:46 AM #1Registered User Promoted
- Join Date
- Jan 2014
- Posts
- 2
Larry
I am running version X5, I have a house that is completed and the client wants to raise the first floor ceiling height for the entire floor. Is there a quick way of doing this or do you have to raise each room individually and then proceed the floors above and do the same. Looking for the upper floors and roof to all go up at the same time when i raise the first floor.
Thanks, Larry
-
01-31-2014, 02:26 PM #2
You should be able to go Defaults...Floor...Structure tab...Ceiling (B) and change the ceiling height - this assumes that all rooms use the default floor ceiling heights.
This will push the floor up and also the ceiling on the floor above.
It will not push the roof up.
You will need to either rebuild the roof, turn on Auto Rebuild Roofs, or, select all the roof planes and move them up the same distance.Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
02-01-2014, 01:49 PM #3Registered User Promoted
- Join Date
- Jan 2014
- Posts
- 2
Hi Glenn,
Thanks for the tip, really appreciate it. Larry