Results 1 to 7 of 7
Thread: Garage Floor Problem
Hybrid View
-
01-29-2014, 04:10 AM #1
Registered User Promoted
- Join Date
- May 2006
- Location
- Orangeville, Pa.
- Posts
- 1,227
Garage Floor Problem
I'm using a pony wall for my garage foundation. It is made up with 5 courses of 10" block with a 6" block course on top. I have the cement floor flush with the top of the 6" block and a 6" stud wall building off the top of the 6" block. When I build the concrete floor, using the room below, my concrete floor stops at the line of the 10" block (attachment). Do I have to lower this floor a 1/2" or so, as a work around, and then just make a p-solid "concrete floor" that goes up against the 6" block or am I doing something wrong in my setup that is causing the concrete floor to stop at the inside of the 10" block line?
Larry Sweeney
Designer/Builder/Restorations/Period Cabinetmaker since 1972
Chief X5, AutoCad 2010
Windows 7 Pro
Asus P8P67 Pro
Intel Core i7 2600k
8 GB DDR# 1600mhz
GTX 670
-
01-29-2014, 06:07 AM #2
Manually build the slab, define slab with a shovel footing, you can then locate the slab edge wherever you want it.
D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-29-2014, 06:23 AM #3
Registered User Promoted
- Join Date
- May 2006
- Location
- Orangeville, Pa.
- Posts
- 1,227
Scott.............What is the term "shovel footing"? Is this type of slab used with a foundation wall? Here in Pa. every foundation needs to be a min. 40" below grade.
Larry Sweeney
Designer/Builder/Restorations/Period Cabinetmaker since 1972
Chief X5, AutoCad 2010
Windows 7 Pro
Asus P8P67 Pro
Intel Core i7 2600k
8 GB DDR# 1600mhz
GTX 670
-
01-29-2014, 06:43 AM #4
Shovel footing is thickened slab edge. It's not a structural footing.
D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-29-2014, 08:16 AM #5
Registered User Promoted
- Join Date
- May 2006
- Location
- Orangeville, Pa.
- Posts
- 1,227
Scott.....Pardon for the lack of knowledge in this department, but are you saying to manually build this "shovel footing slab" inside of my garage foundation? I understand making a p-solid for a slab, but I'm not sure how to go about getting the "shovel footing effect" all the way around the primeter of a p-line solid. I must be out in "left field" on what you'll trying to explain to me. Not only am I out in "left field", but I must be looking the other way also. So if you just want to throw something at me, go ahead. I'm a big target!
Larry Sweeney
Designer/Builder/Restorations/Period Cabinetmaker since 1972
Chief X5, AutoCad 2010
Windows 7 Pro
Asus P8P67 Pro
Intel Core i7 2600k
8 GB DDR# 1600mhz
GTX 670
-
01-29-2014, 09:32 AM #6
I think I would go with the psolid slab, tried it with the footings and did not have any luck. I know I have done it before that way, but did not figure it out. Just use the SLAB WITH FOOTING TOOL.
D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-29-2014, 10:13 AM #7
Registered User Promoted
- Join Date
- May 2006
- Location
- Orangeville, Pa.
- Posts
- 1,227
Scott....Thanks for your time. It's always appreciated. Have a great day.
Larry Sweeney
Designer/Builder/Restorations/Period Cabinetmaker since 1972
Chief X5, AutoCad 2010
Windows 7 Pro
Asus P8P67 Pro
Intel Core i7 2600k
8 GB DDR# 1600mhz
GTX 670