Pass Thru

[carls]

I am framing the front porch pass thru and opening so that I can frame the roof out to that point.
I need to have my footer and stem out to that point as seen in the attached drawing.
There is no other way to do this, correct?

[johnnyprc]

If you are referring to the couple glitches in the corner, I just set the attic wall "stop at ceiling" and then moved the wall over in elevation. I also just moved the roof downward in elevation - per a video Scott showed me with similar issues.

Perhaps I don't fully understand what you are asking - so I realize this may not be your question.

[johnnyprc]

If you are talking about the porch, I just made sure all surfaces were concrete - changed from "porch" to "slab" room...