Results 1 to 4 of 4
Thread: Baseline Dimensions not complete
-
08-29-2013, 08:54 AM #1Registered User Promoted
- Join Date
- Aug 2013
- Posts
- 14
Baseline Dimensions not complete
I used baseline dim for the overall dimensions. They do not go from wall to wall. They go to the first wall. Stop then the next line goes to the next further wall and so on. I am use to baseline dim going from wall to center of opening to wall on the first line. Then the second line would combile the openings and walls for room dimensions. The third line would combine sections of exterial walls where they have corners and then the last line would be the total overall dim.
I tried to draw dim on the baseline where it was blank or didn't connect. It does not draw from dimension line to dimension line. I looked through the videos and didn't find one that covered this. Any help is appreciated.
Thanks,
debbee metz
-
08-29-2013, 09:00 AM #2
I use "End to End" for the overall dim if one isn't generated automatically.
Perry
P.H. DESIGNS L.L.C.
Eastvale Calif.
Alienware, liquid cooled
Ver 10-"X6 x64 SSA
WIN 8.1 PRO 64 bit
Nvidia GTX780 3GB.
i7 920 2.67-- 12 GB Ram
40" led monitor
-
08-29-2013, 09:16 AM #3
check your dim defaults and settings on locate objects
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
09-01-2013, 07:22 PM #4Registered User Promoted
- Join Date
- Aug 2013
- Posts
- 14
Got it. Thanks!