Results 1 to 15 of 39
Hybrid View
-
07-14-2013, 11:21 PM #1
Joe,
The reason that the rail is segmented is because when you edit the 3D molding line by changing it's End Z value, you really are not forming part of a spiral, you are just rotating the arc in one plane.
Try the same thing with a nearly completed circle and you will see that the arc stays coplanar and just rotates in the one plane.
You can't actually define different start and end heights for a 3D polyline arc - they always default to coplanar.Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
07-15-2013, 01:22 AM #2
The short answer is read this, the long answer is reeeeeeeeead thiiiiiiiiiiiis
http://www.chieftalk.com/showthread....ghlight=spiralYour privacy is important to us, your personal details will handled discreetly, and will not be shared with anyone except the CIA, FSB, MI6 or similar, then they will be placed on a USB stick and left on a bus.
-
07-15-2013, 05:54 AM #3Joseph P. Carrick, Architect - AIA
ASUS M51AC Desktop, core i7-4770 CPU @3.4 GHZ, 16 GB Ram, NVidea GT640 with60M with 3GB GM, 30" HiRes (2560/1600) Monitor , (2) 24" ASUS Monitors
Windows 8.1
Chief Architect 9, 10, X1, X3, X4 Premium, X5 Premium, X6 Premium