Results 1 to 10 of 10
Thread: Arched window lintel
-
02-20-2013, 02:57 PM #1Registered User Promoted
- Join Date
- May 2006
- Location
- Orangeville, Pa.
- Posts
- 1,227
Arched window lintel
Looking for suggestions on how to make a window with a arched lintel to be used on a brick veneered wall as shown in attachment. I did find a old thread on this subject when I did a search, but I didn't understand the solution. As always all advice is greatly appreciated.
Larry Sweeney
Designer/Builder/Restorations/Period Cabinetmaker since 1972
Chief X5, AutoCad 2010
Windows 7 Pro
Asus P8P67 Pro
Intel Core i7 2600k
8 GB DDR# 1600mhz
GTX 670
-
02-21-2013, 08:23 AM #2Registered Abuser Demoted
- Join Date
- Jan 2005
- Location
- Reading. Pa area
- Posts
- 815
Hey Larry, I'm using x4 but here's what I did recently (it's not the best work-around but it got the job done for my purposes). See attached image. I just copied the lower window and dragged it vertically and changed it in the dbx (stacking) to level 1. In elevation-camera view, I then made it fixed glass, broken arch and adjusted the arch legs to make it look ok. I gave it an 8" curved lintel with no wrap and could have changed the glass material to the appropriate paint color(white in my instance) to simulate painted wood.
I didn't bother to reassign the lintel material as brick because I wasn't into screwing with brick pattern. It would be easier to do as other I've seen and create 3d polylines on the face of the wall and convert them to polyline solids and give them a texture that looks like brick (without the mortar joints- it would be nice if Chief had a brick texture, wood texture etc that was just generic-maybe I'm missing it). I finally blocked the upper and lower windows to finish the look.-BradArchitect,NOT! (archnot@yahoo.com): Dell XPS 8300, i7-2600 3.40 GHZ Quad Core, Windows 7 Pro 64 bit, ATI-radeon HD 5700 1-gig(not by choice came with cpu), 8 GB RAM, 25" Hanspree HF 255 LCD Moniter- User since Chief '97(v6)-X4
-
02-21-2013, 08:26 AM #3Registered Abuser Demoted
- Join Date
- Jan 2005
- Location
- Reading. Pa area
- Posts
- 815
Follow Up with missing Image Attachment
Sorry Larry,
somehow I did a "Quick Reply" which didn't give me the option to attach and image. Here's the related image that I described.-BradArchitect,NOT! (archnot@yahoo.com): Dell XPS 8300, i7-2600 3.40 GHZ Quad Core, Windows 7 Pro 64 bit, ATI-radeon HD 5700 1-gig(not by choice came with cpu), 8 GB RAM, 25" Hanspree HF 255 LCD Moniter- User since Chief '97(v6)-X4
-
02-21-2013, 10:39 AM #4
I placed a broken arched window on top of the double casement. Added a slab over the broken arch to hide the arched window. Then added a moulding polyline for the arched brick lintel.
This can be created and turned into a symbol, Joe would have a better handle on this.William Page Architects A.I.A.
pagearch@whidbeyisland.com
HP Pavilion dv6 Notebook
Intel i7 CPU Q720@1.60 boost to 2.80 GHZ
4.00 GB
Graphics card 1GB Nvidia Geforce
27" HDMI monitor
-
02-21-2013, 10:43 AM #5D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
02-21-2013, 10:53 AM #6
Scott,
The Brick lintel is a 3D Moulding polyline, first attempt.
I will look at the video.William Page Architects A.I.A.
pagearch@whidbeyisland.com
HP Pavilion dv6 Notebook
Intel i7 CPU Q720@1.60 boost to 2.80 GHZ
4.00 GB
Graphics card 1GB Nvidia Geforce
27" HDMI monitor
-
02-21-2013, 10:55 AM #7D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
02-22-2013, 08:24 AM #8Registered User Promoted
- Join Date
- May 2006
- Location
- Orangeville, Pa.
- Posts
- 1,227
I've been working with the suggestions given and these are the problems I'm encountering. Looking at the exterior view of the two windows----The one on the left I made the arched blue area from a window and added a 3D molding for my brick arch. The problem with this version is that I don't want the top window to show on the inside wall. (second attachment of the interior). On the right window I made a symbol of an arched lintel and added it as an exterior capital under the "Treatments Tab" and then added the brick header as a 3D molding. This gave me the correct look on the interior, but on the exterior the the "capital treatment" is on the face of the brick instead of back with the window. What I'm after is to have just the regular casement show on the inside (as in the attachment of the interior) and have the blue treatment, above the window on the exterior back against the sheeting as shown in the picture of thread #1. Is this possible? What I thought would be a simple feature is proving to be a real PITA for me. Please tell me I'm missing something real basic in what I'm doing. Also, one other question. On the brick arch. Is there anyway to adjust the brick so you don't have thin slivers of brick at each side?
Larry Sweeney
Designer/Builder/Restorations/Period Cabinetmaker since 1972
Chief X5, AutoCad 2010
Windows 7 Pro
Asus P8P67 Pro
Intel Core i7 2600k
8 GB DDR# 1600mhz
GTX 670
-
02-23-2013, 06:50 AM #9Registered User Promoted
- Join Date
- May 2006
- Location
- Orangeville, Pa.
- Posts
- 1,227
I think I found a solution for what it is worth. The window on the right was the look I was after. Both windows only show the regular rectangular window on the inside wall.
Above the left window I made the blue p-solid symbol, labeled it as "millwork". I gave it stretch points so as it was made wider or narrow only the radius of the arch would change. I placed it on the window under the "Treatments Tab" as a exterior capital. As a "capital" it would stretch as the window's width would change (positive). The problem with using it as a "capital" is it attaches to the surface of the brick and I see no way of adjusting the placement to the back against the sheeting.
I took the same blue p-solid and made another symbol, but this time labeled it as a "molding". I then attached it to the window as a lintel. This placed the symbol back against the sheeting for the look I was after. The negative to doing it this way is that when the window width is change you need to make a new sized molding symbol for the new width. In both windows the brick arch is a 3D molding placed "after the fact".
The ideal solution (and what I wanted to do) was to figure a way to have the symbol back against the sheeting AND have it stretch as the window changes in width. If anyone has that solution PLEASE chime in. Thank you all for your time and advice given on this thread and have a great day.Larry Sweeney
Designer/Builder/Restorations/Period Cabinetmaker since 1972
Chief X5, AutoCad 2010
Windows 7 Pro
Asus P8P67 Pro
Intel Core i7 2600k
8 GB DDR# 1600mhz
GTX 670
-
02-23-2013, 04:52 PM #10Member-Cliff Cain
- Join Date
- Oct 2004
- Location
- Denton, TX
- Posts
- 4,311
Not a solution, but something to play with......The below jpg shows using a millwork symbol consisting of the brick arch, lintel, and the interior material. The symbol's origin is adjusted so it will recess into the wall above the window. A pass thru window is placed above the bottom window, so it will cut the brick. This symbol is added in the window spec dbx, via the Treatment tab (Capital). The height & width of the capital will need to be adjusted as well......It can be blocked and moved as one unit.
Cliff
X6
Vista Home Premium SP-2
Gateway FX6800-01e
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
7.00 GB RAM DDR 3........64-bit OS
NVIDIA GeForce GTS 250/PCIe/SSE2 1024 MB Memory