Results 1 to 5 of 5
-
01-23-2013, 09:25 PM #1Registered User Promoted
- Join Date
- Jan 2013
- Posts
- 3
Version 10 - Good place to locate manufacture libraries
I'm looking to expand my libraries on CA v10. I am specifically looking for cabinet manufacture libraries. Is there a good place to find these or specific links to manufacture pages? I can't seem to find much. I know that v10 is a little outdated and not supported by Chief much but there has to be something out there. Any help would be great. Thanks!
-
01-23-2013, 09:41 PM #2
you can try various vendor websites and if they have .dwg or .dxf files
you can try downloading those
check MENU - FILE - IMPORT to see what other formats ver 10 can import
if I remember correctly it is fairly limited, especially for 3D symbols
starting with ver X1 chief can import .SKETCHUP files from the free TRIMBLE warehouse
and other siteds with .SKP files
so I think you choices are very limited with ver 10
you could try finding a copy of ver 6 for Sketchup and then convert other files formats
that Sketchup can handle into .DWG or .DXF files
I don't remember how well that worked
but I do remember it being an option back then
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-23-2013, 10:24 PM #3Registered User Promoted
- Join Date
- Jan 2013
- Posts
- 3
Thanks for the info. I haven't had much luck so far. Sketchup v6 won't open most of the files on Trimble because they are v8+. Marvin windows/doors is still the only company I've found that has compatible symbols for download.
-
01-23-2013, 11:31 PM #4Registered User Promoted
- Join Date
- Jan 2013
- Posts
- 3
I have located some cabinets in .dwg format but I can't get them to load onto my plan. I select import - drawing (dwg) and then follow the steps but nothing shows up. Am I doing this wrong?
-
01-24-2013, 04:32 AM #5
use the free Sketchup 8 and save as sketchup 6 fil
then use Sketchup 6
check chief ver 10 for which version of autocad it can use
some of the vendors may be using the latest autocad version
you could try using Accutrans or some other free converter to
change to an autocad format chief ver 10 can use
also, maybe Sketchup 8 can save to that format ???
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)