Results 1 to 7 of 7
Thread: Angular Dimensions
-
12-19-2012, 01:00 AM #1Registered User Promoted
- Join Date
- May 2008
- Posts
- 71
Angular Dimensions
I seem to have a bit of a hiccup with my angular dimensions.
Example:
I draw a detail at 1:10 scale, send it to layout.
Go back to my plan, change my active annotation set to a 1:100 scale.
Go to my layout page and my angular dims are all HUGE, yet all the other dims are the same.
They seem to change with whatever the set is that I'm using at the time, even if its not in the same CAD detail section (I have a different one set up for each one I use).
I'm not sure if I described that in a way that is understandable...
But any help would be handy.
Emma Reynolds
COTAN Pty Ltd
Australia
Chief X4
Chief X5
-
12-19-2012, 02:26 AM #2
Emma,
Are you really drawing your detail at 1:10 scale or are you drawing it at full scale and using a 1:10 scale annoset.
Can you post the plan and layout files?
It sounds strange that only the angular dimensions are changing size.Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
12-19-2012, 04:18 AM #3
to add to what Glenn is saying:
everything in the plan including cad details should be drawn at 1:1 scale
then when you send to layout use 1:10 or 1:100 etc
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
12-19-2012, 08:17 AM #4
You are not having trouble. The angle dimension tool does not keep it's scale. It changes scale in every drawing when you change scale in any drawing. I discovered this and went over it with the help line people. Please report this to the company so they get incentive to correct it.
Chad Williams
-
12-19-2012, 10:29 PM #5Registered User Promoted
- Join Date
- May 2008
- Posts
- 71
oh, yer, I'm drawing it 1:1 and just using the 1:10 annoset, sorry, guess I wasn't clear on that one.
I draw it 1:1, send it to layout as 1:10, 1:20 etc.
Then if I go into the plan, change my set to another scale the dims change.
I'll see if I can attach a picture that would show it properly.
Emma Reynolds
COTAN Pty Ltd
Australia
Chief X4
Chief X5
-
12-19-2012, 10:30 PM #6Registered User Promoted
- Join Date
- May 2008
- Posts
- 71
-
12-19-2012, 10:37 PM #7Registered User Promoted
- Join Date
- May 2008
- Posts
- 71