Results 1 to 6 of 6
Thread: attic wall problem
-
12-17-2012, 09:33 AM #1Registered User Promoted
- Join Date
- Mar 2009
- Posts
- 18
attic wall problem
Hi all,
You can see in the pdf files that CA v10 has turned what should be an interior attic wall into an exterior wall, beats me why. The render view also shows other glitches, like the little partition that doesn't go to the ceiling, and dark horizontal shadows on other walls that I wish weren't there. What have I done wrong? Many thanks,
Marc
-
12-17-2012, 09:56 AM #2
Marc, if they're attic walls, then the roof has a part in this as well. Attic walls are only associated with roofs. It will be hard to tell what the problem is without seeing a plan.
Tommy Blair
Houston, TX.
(713) 467-0579
tblair55@sbcglobal.net
Avid Chief User V8-X5
Lead Houston User's Group
HP Dv7t Quad Edition Laptop
W7 Home Premium, 64-Bit
2nd Gen. Intel Quad Core i7-2720QM 2.2 GHz (turbo boost to 3.3 GHz)
1GB Radeon HD 6770M GDDR5
8GB DDR3 System Memory, 640GB 7200rpm Hard Drive
(2) 2.0 ports, (2) 3.0 ports
17.3" Monitor (1600x900)
-
12-17-2012, 02:27 PM #3Registered User Promoted
- Join Date
- Mar 2009
- Posts
- 18
Thanks Tommy. Here's the floor plan with and without roof framing. There is a sloped ceiling plane in there as well... I've put in two invisible walls so that I could set the exterior wall heights in the room specification dialogue. What do you think?
-
12-19-2012, 02:49 PM #4
Marc, I see you posted the problem again. When I mean posting a plan I really don't mean a pdf of the plan but the actual Chief plan itself. I don't have V10 loaded anymore but could look at it in X1 on up. Many others here might not hav V10 either but will look at it with a later version. I'm pretty sure David Potter still has V10 on a computer.
Tommy Blair
Houston, TX.
(713) 467-0579
tblair55@sbcglobal.net
Avid Chief User V8-X5
Lead Houston User's Group
HP Dv7t Quad Edition Laptop
W7 Home Premium, 64-Bit
2nd Gen. Intel Quad Core i7-2720QM 2.2 GHz (turbo boost to 3.3 GHz)
1GB Radeon HD 6770M GDDR5
8GB DDR3 System Memory, 640GB 7200rpm Hard Drive
(2) 2.0 ports, (2) 3.0 ports
17.3" Monitor (1600x900)
-
12-19-2012, 03:32 PM #5
Yes, I still have 9.5, 10 etc but that phenomena has not changed at all in Chief, you just make sure your room dialogs are set properly and then handle the attic walls however you want them handled as I mentioned in the other thread.
DJP
David Jefferson Potter
Chief Architect ® Trainer, Beta Tester, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Win7 Ultimate x64 & XP Pro x32, 500 Gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
Chief 7-X6, Home Designer versions 7-2014
3101 Shoreline Drive #2118, Austin, Texas 78728-4446
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel
Help is just an e mail or call away!
-
12-19-2012, 04:34 PM #6Registered User Promoted
- Join Date
- Mar 2009
- Posts
- 18
Ok, I fixed it. What fooled me was that I needed to set the room dialog for the closet, duh. Thanks gentlemen!