Results 1 to 12 of 12
Thread: Room area
-
11-10-2012, 11:20 PM #1Registered User Promoted
- Join Date
- Mar 2007
- Location
- Bay Area, California
- Posts
- 1,334
Room area
I have a townhouse configuration and Im trying to figure out what the individual units square footages are. Since they overlap its not very easy to figure this out. I was guessing the only way to go about this is using the text specification box and insert living area and add it all up. Does anyone have any quicker easier ways then this?
Second part of my question is Im looking for square footage of the plans, so what insert option is best: internal room area, living area or standard room area? Does anyone know the main differences in these choices?
Thanks in advance!Chad Cardin
MEMBER SINCE V9... NOW X5
-
11-11-2012, 02:52 AM #2
Chad:
not sure of the differences
I have been requesting that CA put all of these values into a "spreadsheet" format so that we can export to Excel
and then choose the values we need
Chief does allow us to specify in the room dbx if that room is to be included
this helps but having all values in a "spreadsheet" would be better
Chief knows the values - why not give them all to us ???
then we could easily review the differences between: internal room area, living area or standard room area
the volume of each room would also be helpful
for a project we might be working for a homeowner or builder or realtor or appraiser or ...
they all have different requirements for what to include in "living area" or sqft etc
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
11-11-2012, 07:23 AM #3
I use rectangular polyline then shape it around my plan, open its DBX and get the area. I do them on their own layer and fill them with different color for each type (Garage, Parch, etc)
Ash Shaker
Architect
Ash Tree Architecture
Elkridge, MD, USA
CA X5
-
11-11-2012, 08:01 AM #4
I use the room finish schedule, using the standard type configuration, it also adds them up for you automatically and you can include or exclude any room from the list. There is some setup in the defaults but once you set it up once, your ready to go. You can also set it up just for square footages and no room finish if thats what you want. Keep it on the active floor plan and it will change as you add rooms. live.
Perry
P.H. DESIGNS L.L.C.
Eastvale Calif.
Alienware, liquid cooled
Ver 10-"X6 x64 SSA
WIN 8.1 PRO 64 bit
Nvidia GTX780 3GB.
i7 920 2.67-- 12 GB Ram
40" led monitor
-
11-11-2012, 08:24 AM #5
These settings "Standard and interior displays" are defined in the Reference Manual, no point in my reciting them from memory when you can look them up and read for yourself, this is not arcane knowledge.
DJP
David Jefferson Potter
Chief Architect ® Trainer, Beta Tester, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Win7 Ultimate x64 & XP Pro x32, 500 Gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
Chief 7-X6, Home Designer versions 7-2014
3101 Shoreline Drive #2118, Austin, Texas 78728-4446
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel
Help is just an e mail or call away!
-
11-11-2012, 10:20 PM #6Registered User Promoted
- Join Date
- Mar 2007
- Location
- Bay Area, California
- Posts
- 1,334
Im wondering if doing the polyline solid method would be counting square feet that is actually not being used, ie: space used up by walls etc?
Chad Cardin
MEMBER SINCE V9... NOW X5
-
11-12-2012, 04:58 AM #7
I use the polyline method for that reason, i.e. to include the area taken by walls. For county or builder calculations they need gross areas.
Ash Shaker
Architect
Ash Tree Architecture
Elkridge, MD, USA
CA X5
-
11-12-2012, 08:53 AM #8
The room finish schedule using the standard method also does a good job, it didn't used to back a while ago, but does now.
Perry
P.H. DESIGNS L.L.C.
Eastvale Calif.
Alienware, liquid cooled
Ver 10-"X6 x64 SSA
WIN 8.1 PRO 64 bit
Nvidia GTX780 3GB.
i7 920 2.67-- 12 GB Ram
40" led monitor
-
11-12-2012, 05:32 PM #9Registered User Promoted
- Join Date
- Mar 2007
- Location
- Bay Area, California
- Posts
- 1,334
Ash,
Thanks for the other calculation idea. Perry, how does the standard method work better now? What version did you notice that this worked better? It appears to work the same way, how does it seem different for you?Chad Cardin
MEMBER SINCE V9... NOW X5
-
11-13-2012, 08:07 AM #10
Chief gives good counts for floor area and it is per the assessor and appraiser standard, which means it is calculated to the outside building lines, and staircases are only counted once. Thus, a rectangular house 30 x 40 feet, two stories, with a 6 x 12 (72 sf) staircase, would read 1200 sf main floor, and (1200 - 72) 1128 sf on the second.
The material list calcs do room area to the inside faces of framing and ignore finish (drywall, etc.) thickness. For whatever else is needed, there are the excellent CAD and measurement tools.Gene Davis
SSA: X5 Premium, X4 Premium, X3, X2 (12.5.1.9), 10.08.b
Intel i7 quad-core 64-bit HM65 express, Windows 7, 16 GB RAM, NVidia GeForce GTX560M - 3 GB GDDRS - SDRAM
Google Sketchup 8.0
DropBox cloud storage
-
11-13-2012, 08:11 AM #11
If you want the individual room net areas - create a room polyline. The net area will be shown in the Polyline' dbx.
Joseph P. Carrick, Architect - AIA
ASUS M51AC Desktop, core i7-4770 CPU @3.4 GHZ, 16 GB Ram, NVidea GT640 with60M with 3GB GM, 30" HiRes (2560/1600) Monitor , (2) 24" ASUS Monitors
Windows 8.1
Chief Architect 9, 10, X1, X3, X4 Premium, X5 Premium, X6 Premium
-
11-13-2012, 08:28 AM #12
Back a few versions ago the Ver 10 maybe, the s.f. was off and didn't give accurate numbers.
Perry
P.H. DESIGNS L.L.C.
Eastvale Calif.
Alienware, liquid cooled
Ver 10-"X6 x64 SSA
WIN 8.1 PRO 64 bit
Nvidia GTX780 3GB.
i7 920 2.67-- 12 GB Ram
40" led monitor