Results 1 to 5 of 5
Thread: Help with Units
-
10-25-2012, 10:12 PM #1Registered User Promoted
- Join Date
- Oct 2012
- Posts
- 3
Help with Units
is there a way to change ALL the units to millimeters? i received some guide here to change the units to mm whilst im drawing in the workspace, but if i want to change the length of a window or door, the properties window still has all of that in inches. can anyone help?!
-
10-25-2012, 10:38 PM #2
Sounds like you are using an imperial template.
You should be using:
Preferences...General...New Plans...Metric Units (click the radio button)
and select default unless you have another you want to use.Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
01-03-2013, 05:16 AM #3Registered User
- Join Date
- Jan 2013
- Posts
- 1
Hi, I´m working as an architect in Sweden. Here we are only using the units millimeter instead of feet/inches, kvadratmeter instead of square feet/inches and so on. I´m therefore wondering if there is any way of using the program (Chief Architect Premier X5), to always use these units? I don´t want to have to make changes or settings each time I want to use these units. I would also be glad if there is possible to have the units displayed as "kvadratmeter" instead of "sq metres" etc. Is it possible to change the text in room labels as for example "kitchen" to the swedish translation "kök"?
Thanks in advance,
Dan
-
01-03-2013, 08:00 AM #4
Dan:
start a plan with the profilem.plan template for metric
not sure about "kvadratmeter" instead of "sq metres" ???
you can change the room label in the room dbx as needed
leave room type as "kitchen" just change the label
but you will have to do that for each room in each new plan
I don't think there is a way to change the defaults
Lew
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-03-2013, 08:46 AM #5Administrator
- Join Date
- Jan 2000
- Posts
- 4,161
Out of the box Chief will choose either imperial or Metric depending on the setting of your computer. If you have your computer set up to use metric units Chief will choose that. However, if not you can always change it later in preferences.
Doug Park
Principal Software Architect
Chief Architect, Inc.