Results 1 to 15 of 19
Thread: Chain link fencing
Threaded View
-
08-11-2012, 06:44 AM #1
Registered User Promoted
- Join Date
- Sep 2003
- Location
- Jacksonville, FL
- Posts
- 333
Chain link fencing
I have tried to use the chain link fencing from the library. It was not a pretty picture. First, when I tried to just drag the fence along the property line but it does not put the intermediate post in at 96" OC. So I try to transform replicate. This works ok but the property is not at 90deg so I select multiple copies. This sorta works but you end up with double post on every copy. To top it all off the gate only works if there is a wall there! I had to do a work around and forget the library items. I had to use a cylinder from the library for the top rail, half wall as a railing with balusters at 96" OC. then put the gate in. The fence fabric was from a png pattern I had in stock. Why put a gate in the library if it does not work with the fence? Why not make the fence an easy item with no work around? Chain link fence is a very common item when doing site plans. Maybe in ver 5?