Results 61 to 75 of 154
Thread: The dsh Terrain Building Test
-
01-21-2012, 11:32 PM #61
Maybe to help, I made a video which visually demos how chief calculates the pad elevation. Glenn's plans are more detailed but sometimes a visual helps to understand.
The video is a little long winded, because I'm just slow, but I think it covers most bases. I did discover a update problem which was giving strange results. This may be some of Scott's problem.
http://dl.dropbox.com/u/30269729/Pad%20elevation.mp4
MP4 file
http://dl.dropbox.com/u/30269729/Pad%20Elevations.wmv
WMV file
In any event, when Chief does update properly, the calculations appear consistent and correct. Problem is not in cals, problem is in correct updates.Last edited by gteacher; 01-22-2012 at 12:26 AM.
Gerry
NewCraft Home Services
Design/ Compliance Review
PE, X6 , Sketchup 8, TurboCad Pro 20
-----------------------------------
ASUS P9X79D, i7-3820, GTX680 w/4gb
-----------------------------
If the Government would just cut down more d*** trees, I'd have a much better view of the forest.
-
01-22-2012, 01:36 AM #62
Lew,
Thanks for the lesson, and I do like your anology with the boat.
But you missed the meaning of my post - I was trying to get people to look at how things work from a different perspective in the hope it may make this whole thing easier to understand - apparently not!
Gerry,
In your video when you are looking at the section about at 12:37:08, you talk about Chief showing the cut and fill.
As far as I know, Chief doesn't do this.
Are you sure that what you are seeing isn't the terrain in elevation?
Can you post that plan so that I can have a look?Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
01-22-2012, 05:20 AM #63
But you missed the meaning of my post - I was trying to get people to look at how things work from a different perspective in the hope it may make this whole thing easier to understand - apparently not!
Glenn:
for most chiefers the primary focus is on the house and while using auto-calc the terrain is their secondary focus
thus, they drop in a little elevation data (regions, lines) to get the 3D to look ok and
are not concerned with real world sea level values etc
for them your thought process would make the most sense
all values are RELATIVE to the default of 0" sea level
but in reality chief's primary focus is on the terrain and its relation to sea level and then the
seondary focus is on how the house elevation is calculated from those sea level values
since this is the way chief approaches it I think its good for chiefers to understand that
chief uses 0" sea level for the auto-calc
because once auto-calc is off it is a whole new ballgame....
at that point chief uses ABSOLUTE sea level values for the terrain elevation data (regions, lines)
and for the pad elevation and BOTH MUST be entered
so I think the switch in thought process fom RELATIVE to ABOSLUTE
can cause confusion for some chiefers
thus, I like to think in terms of ABSOLUTE at all times with the understanding that
while auto-calc is on chief is displaying the data as RELATIVE values
when auto-calc is off then chief works in ABSOLUTE and displays in ABSOLUTE
LewLast edited by lbuttery; 01-22-2012 at 05:23 AM.
Lew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-22-2012, 05:54 AM #64
Glenn
Your right, Chief does not do cut/fill, or if they do they do it very badly. But obviously, in order to create a level pad, some cut/fill has to be done and I was guessing that the double terrain line looked like some type of cut/fill.
But your explanation is better, what I was looking at was really the end of the level pad area on the back/top side of the building. This would approximate a cut/fill section. Note I did say it was wrong.
Attached is plan. I think we beat this one to death. Real problem and confusion is just that Chief updates intermittently and sometimes bizarrely. I agree now-- somewhat-- with Scott.Gerry
NewCraft Home Services
Design/ Compliance Review
PE, X6 , Sketchup 8, TurboCad Pro 20
-----------------------------------
ASUS P9X79D, i7-3820, GTX680 w/4gb
-----------------------------
If the Government would just cut down more d*** trees, I'd have a much better view of the forest.
-
01-22-2012, 06:02 AM #65
Gerry:
nice video
It was interesting to see that chief's online manual uses "sill plate" in the calculation - the printed manual doesn't mention it
maybe you can do a video showing the relationship of the
terrain elevation (regions, lines etc) and the pad elevation when auto-calc is on and when it is off
I think this is an area that is causing Scott some confusion...
I hadn't noticed a re-build issue but then I wasn't focused on the pad elevation to the level of detail
that you showed in the video - very informative
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-22-2012, 06:17 AM #66
Lew
I'll try to do another video, maybe after the ball games tonight. Hopeful, it will be a little less winded.
But, I'm thinking now, that maybe people do know ,in general, how to calculate this. Or,if not, there just seeing different results for the same input, do to the update problem. In any event, we, as always, need to double check Chief on occasion and knowing the exact method of these calculations is required.
Your explanations are better than mine, but I'll try to put a visual to it.
We really NEED that "sea Level" bias.Gerry
NewCraft Home Services
Design/ Compliance Review
PE, X6 , Sketchup 8, TurboCad Pro 20
-----------------------------------
ASUS P9X79D, i7-3820, GTX680 w/4gb
-----------------------------
If the Government would just cut down more d*** trees, I'd have a much better view of the forest.
-
01-22-2012, 07:36 AM #67
Wow, this has been great and I appreciate the participation. I do not need help in building the model, remember I posted a picture of the model with the first post. I think I can build any terrain with the best of them, I have done so many videos on terrains that I know how to build them, but I do use different nomenclature and methods.
I admit my initial post was not clear enough, I wanted to know at what elevation you would set the TERRAIN PERIMETER/TERRAIN ELEVATION/BUILDING PAD, the answer is 20', thanks Glenn. I also wanted to point out that Doug's AVERAGE ELEVATION input (http://www.chieftalk.com/showthread....799#post423799) was a non starter, thanks Lew.
This post also proved a point that terrain building is confusing, or should I say that many of us can reach the same solution but with different methods or thought processes.
The point of this thread was to get the terrain building process more user friendly.
I think it was Bill Layman who in a prior thread eluded to a missing function, the ability to, with a flip of a button, have the contours either read out as relative to sea level or relative to the house finished floor of 0.0, thanks Bill.
Now I will explain how I work and how most of you probably work, so read the following several times to see if you agree.
When I build a house, typically an as built, I build a terrain perimeter/building pad and set contours relative to the house f.f. of 0.0. Being able to create a BUILDING PAD gives me the ability to put in driveways, sidewalks etc. It is not until later that a topo map is provided, if provided at all.
FOR ME THIS IS THE KEY, AT WHAT POINT IN THE DESIGN PROCESS DO I GET AN ACTUAL TOPO MAP? TYPICALLY AFTER THE PLAN AND BUILDING PAD HAS BEEN BUILT.
If this is the way we work, which initially has all topo info relative to house f.f., and we later get a topo that says everything needs to be adjusted by 20', why can't we have an input that would increase or decrease the TOPO LINE DATA , adjusted by 20'.
There, that is what we need, the ability to have the site elevations relative to the house or relative to sea level with the flip of a button.D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-22-2012, 08:14 AM #68
Scott:
you are correct, just as Glenn pointed out - most chiefers think of the house first
then later want to set the terrain relative to the house
unfortunately, that's not the way chief thinks at this time
you mention setting the pad elevation to 20'
in chief that means 20' above sea level whereas you are probably thinking 20' above "terrain"
consider building a house in Denver the "mile high city"
there is lots of flat land there yet the sea level elevation is 5000'
thus when you enter a value into the "pad elevation" you should be entering 5020'
the up slope contours would then be 5021,5022, etc
the down slope contours would then be 5019,5018 etc
this is important when trying to match a survey's contours
I do think it would be nice if chief would allow us to display the contours in "relative" terms
of the relationship between the house and the terrain
even tho we enter the values in absolute terms in relation to sea level
LewLast edited by lbuttery; 01-22-2012 at 08:35 AM.
Lew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-22-2012, 08:23 AM #69
Scott, yes to your suggestions, and 1 other. The fact you cannot change that 6" that Chief adds to the terrain height should be adjustable by the user and not automatic by Chief.
Perry
P.H. DESIGNS L.L.C.
Eastvale Calif.
Alienware, liquid cooled
Ver 10-"X6 x64 SSA
WIN 8.1 PRO 64 bit
Nvidia GTX780 3GB.
i7 920 2.67-- 12 GB Ram
40" led monitor
-
01-22-2012, 08:38 AM #70
Perry, you are absolutely correct, 8" is the new code here in the Great State of Fruits and Nuts, and I suppose the user should be able to adjust this. However this auto calculate feature is nonsense to me, I think this may have been designed for the newbie, and I get that, no problem. I never use it and I do not need to, the manual setting works quite well.
D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-22-2012, 08:58 AM #71
Lew, I reviewed your posted plan, and it was wrong. You F.F. elevation was set at 1.8' above grade on the outside, not the 1.0' above grade that I wanted. Here is a link to the video if interested.
http://chieftutor.com/dscotthall/LEW...0CHALLENGE.wmvD. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-22-2012, 09:13 AM #72Administrator
- Join Date
- Jan 2000
- Posts
- 4,161
I must admit in reading this I was and am still somewhat unclear as to what the confusion is. Let me see if I understand the confusion.
It appears that the confusion lies mainly in where the offset between the terrain elevation coordinate origin is and where the house coordinate origin is. Is this correct?
It also appears that there may be some confusion with the idea that the terrain and house have independent vertical coordinate systems. Is this correct?
I'm still trying to figure out why so much is being made about such a simple concept which leads me to believe that there is still something I'm missing.
Based on the images that Scott posted it appears that the offset is being calculated as described in the manual, but perhaps I'm missing something there as well.Doug Park
Principal Software Architect
Chief Architect, Inc.
-
01-22-2012, 09:15 AM #73
Scott:
could be it was wrong, I was concerned with matching your contour lines
not the F.F.
I missed that was part of the challenge
the manual setting works quite well
so with a completely flat lot what do you set the "pad elevation" to ???
and what components make up that total value ???
I'll go watch your video
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-22-2012, 09:22 AM #74
I'm still trying to figure out why so much is being made about such a simple concept which leads me to believe that there is still something I'm missing.
Doug:
it is far from 'SIMPLE" - as evidenced by the confusion of terms and concepts
etc
not sure how to explain the confusion except to ask that you review each of the posts in this thread and take notes of what is confusing to each poster
then perhaps you can explain it to us in simple terms how it currently works ???
I think part of the confusion is switching the conversation back and forth between the auto-calc ON method and the auto-calc OFF method
my understanding is that they are two different methods
but then maybe I am confused
so please explain what chief does with each method
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-22-2012, 09:30 AM #75
I think the difference (Lew's drawing) in pad height using auto calculate is raised floor vs. slab, different platform depths.
Perry
P.H. DESIGNS L.L.C.
Eastvale Calif.
Alienware, liquid cooled
Ver 10-"X6 x64 SSA
WIN 8.1 PRO 64 bit
Nvidia GTX780 3GB.
i7 920 2.67-- 12 GB Ram
40" led monitor