Results 1 to 15 of 154
Thread: The dsh Terrain Building Test
Hybrid View
-
01-22-2012, 01:36 AM #1
Lew,
Thanks for the lesson, and I do like your anology with the boat.
But you missed the meaning of my post - I was trying to get people to look at how things work from a different perspective in the hope it may make this whole thing easier to understand - apparently not!
Gerry,
In your video when you are looking at the section about at 12:37:08, you talk about Chief showing the cut and fill.
As far as I know, Chief doesn't do this.
Are you sure that what you are seeing isn't the terrain in elevation?
Can you post that plan so that I can have a look?Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
01-22-2012, 05:20 AM #2
But you missed the meaning of my post - I was trying to get people to look at how things work from a different perspective in the hope it may make this whole thing easier to understand - apparently not!
Glenn:
for most chiefers the primary focus is on the house and while using auto-calc the terrain is their secondary focus
thus, they drop in a little elevation data (regions, lines) to get the 3D to look ok and
are not concerned with real world sea level values etc
for them your thought process would make the most sense
all values are RELATIVE to the default of 0" sea level
but in reality chief's primary focus is on the terrain and its relation to sea level and then the
seondary focus is on how the house elevation is calculated from those sea level values
since this is the way chief approaches it I think its good for chiefers to understand that
chief uses 0" sea level for the auto-calc
because once auto-calc is off it is a whole new ballgame....
at that point chief uses ABSOLUTE sea level values for the terrain elevation data (regions, lines)
and for the pad elevation and BOTH MUST be entered
so I think the switch in thought process fom RELATIVE to ABOSLUTE
can cause confusion for some chiefers
thus, I like to think in terms of ABSOLUTE at all times with the understanding that
while auto-calc is on chief is displaying the data as RELATIVE values
when auto-calc is off then chief works in ABSOLUTE and displays in ABSOLUTE
LewLast edited by lbuttery; 01-22-2012 at 05:23 AM.
Lew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)