Results 1 to 15 of 154
Thread: The dsh Terrain Building Test
Hybrid View
-
01-21-2012, 05:53 AM #1
The challenge to Doug Park and the CA staff.....
Doug, do me a favor and see how you folks at CA build this model. I am sure the model is an easy 5 minute build, but what may be interesting is to find out at what elevation everybody sets their terrain perimeter at. Your recommendation is the average...... well, so what is the average, and do they get the correct contour elevations that I have specified in the previous post.
D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-21-2012, 06:31 AM #2
Scott:
I will try the challenge soonest
but I think you missed the point that it is the average of the terrain
beneath the FOOTPRINT of the house
Chief determines that average then adds the floor1 platform height then adds 6" when using auto-calc
this height is where the house sits and is "house 0"
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-21-2012, 06:36 AM #3
Okay, then do it, I would bet your definition of average is different from Doug's definition, talk is cheap, just do it. Let's see how Doug does it, that is the whole point of this thread, what do you think the average height of the terrain is? And now that you have determined what YOU think the average ht. is, how do you get the plan to look like mine with the contours called out as I have done.
D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-21-2012, 06:46 AM #4
Scott:
look at the manual .....
I'll do it when I have time - sometime today
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-21-2012, 06:49 AM #5D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
01-21-2012, 07:52 AM #6
AVERAGE, AVERAGE, don't talk about AVERAGE!!!
Here are Chief's rules from the help.
--------------------------------------------------------------
The program automatically positions Floor 1 a set distance above the terrain. To do this, it first finds the center point of the building footprint. Then, it determines the elevation of the terrain at that point. Finally, it adds 6” (150 mm) plus the thickness of the floor platform and treated sill plate to this value. The resulting value, referred to as the Building Pad Elevation, is how far the default height of Floor 1 is above sea level in the current plan. See Foundations and the Terrain.
In a plan with a foundation present, the Elevation distance will equal the exact terrain elevation at the building footprint center point, plus 6” (150 mm), plus the thickness of the floor platform.
• In a plan with no elevation data, the ter*rain is assumed to be at sea level and this Elevation distance is 6” (150 mm) plus the thickness of the floor platform when a foundation is present.
• In a plan with flat terrain at 100’ (30 m) and a foundation present, the Elevation distance is 100’ 6” (30.468 m) plus the thickness of the floor platform.
Once terrain has been built, the Elevation distance is stated in the Terrain Specification dialog. You can specify a custom Elevation value to produce a daylight or walkout basement. See General Tab.
------------------------------------------
I just checked and Chief follows these rulesGerry
NewCraft Home Services
Design/ Compliance Review
PE, X6 , Sketchup 8, TurboCad Pro 20
-----------------------------------
ASUS P9X79D, i7-3820, GTX680 w/4gb
-----------------------------
If the Government would just cut down more d*** trees, I'd have a much better view of the forest.
-
01-21-2012, 08:20 AM #7
AVERAGE, AVERAGE, don't talk about AVERAGE!!!
Gerry:
hmmm, I took center point to mean average
thus, if the terrain varies beneath the footprint of the house
the house will be "nestled" within the terrain
some portions exposed - some portions buried
I haven't tested it yet but I doubt if chief looks for the actual center point and "hoists" the house on top of that point ???
I'll try a test soonest where there is a spike of terrain under the footprint
to see what happens
Scott:
I have attached two plans, one for your challenge where auto-calc is off and one where it is on
when auto-calc is off - chief doesn't use the center-point (average ?)
it goes by the absolute value entered in the pad elevation and the absolute date entered in the elevation data (region) dbx's
when auto-calc is on - chief uses the center-point (average ?)
plus floor1 platform height + 6"
Perry:
with a 12" platform this places the house 18" above the terrain
EDIT:
I posted the wrong auto calc plan
see post below with correct plan
LewLast edited by lbuttery; 01-21-2012 at 08:31 AM.
Lew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
01-21-2012, 08:32 AM #8
In the above post I attached the wrong auto calc plan
here is the correct plan
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)