Results 1 to 15 of 154
Thread: The dsh Terrain Building Test
Hybrid View
-
01-22-2012, 05:54 AM #1
Glenn
Your right, Chief does not do cut/fill, or if they do they do it very badly. But obviously, in order to create a level pad, some cut/fill has to be done and I was guessing that the double terrain line looked like some type of cut/fill.
But your explanation is better, what I was looking at was really the end of the level pad area on the back/top side of the building. This would approximate a cut/fill section. Note I did say it was wrong.
Attached is plan. I think we beat this one to death. Real problem and confusion is just that Chief updates intermittently and sometimes bizarrely. I agree now-- somewhat-- with Scott.Gerry
NewCraft Home Services
Design/ Compliance Review
PE, X6 , Sketchup 8, TurboCad Pro 20
-----------------------------------
ASUS P9X79D, i7-3820, GTX680 w/4gb
-----------------------------
If the Government would just cut down more d*** trees, I'd have a much better view of the forest.
-
01-22-2012, 06:02 AM #2
Gerry:
nice video
It was interesting to see that chief's online manual uses "sill plate" in the calculation - the printed manual doesn't mention it
maybe you can do a video showing the relationship of the
terrain elevation (regions, lines etc) and the pad elevation when auto-calc is on and when it is off
I think this is an area that is causing Scott some confusion...
I hadn't noticed a re-build issue but then I wasn't focused on the pad elevation to the level of detail
that you showed in the video - very informative
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)