Results 1 to 5 of 5
Thread: Gable Trim
-
01-02-2012, 11:53 PM #1Registered User Promoted
- Join Date
- Sep 2011
- Posts
- 6
Gable Trim
Come on All you Thinkers out there!!! Iam using x 4 and I am putting togeather a simple 1 1/2 story ranch. but know matter what i try it wants to leave off the trim board on just one section of a front gable and this lets you see the under side of the roof sheathing if your at the right angle on the larger of the two gables on the left side of the house ..Some help is needed I am pulling out what little hair i have left.
Last edited by vinnie229; 01-03-2012 at 02:29 PM. Reason: More discription
-
01-03-2012, 02:35 PM #2
Notice that the rake is cut off directly above the edge of the bump out wall. Make sure that your roof baselines are in the correct position. It would be easier if you could post the plan.
Gary Doski
3 D Homes Design Services LLC
Certified Chief Architect X5 Trainer.
Ver. X5, thru X1
I train you on your jobs!
Learn & get your work done at the same time!
Building Official- CT
203-270-0646 fax 203-304-2101
garydoski531@gmail.com
www.3dhomesdesign.com
Windows 7 Ultimate-64bit
i7 975 3.3 GHz 8 cores
Corsairs 12Gb Ram
Radeon ATI 9870x2 Crossfire 2Gb
Ultra 1600 watt PS
-
01-04-2012, 05:52 AM #3Registered User Promoted
- Join Date
- Sep 2011
- Posts
- 6
Missing gable trim
This problem now has be keeping me awake at night. Missing a piece of trim board on the larger of the to gables on the left side of the house. These have been all auto roof planes and even when I change them my self it does not fix Thanks for your intsest gary i posted some floor plans that may help . maybe its just me....
-
01-04-2012, 06:05 AM #4Registered User Promoted
- Join Date
- Sep 2011
- Posts
- 6
Missing Trim
Gary I owe you one.!!! Went back to the drawing board. Even though these were auto roof planes I went back and moved the roof plane about one one hundredth of an inch the trim became visible .. Thanks againg Gary now that I know it's that sensative it wont get me again ( I hope)
-
01-04-2012, 10:06 AM #5Gary Doski
3 D Homes Design Services LLC
Certified Chief Architect X5 Trainer.
Ver. X5, thru X1
I train you on your jobs!
Learn & get your work done at the same time!
Building Official- CT
203-270-0646 fax 203-304-2101
garydoski531@gmail.com
www.3dhomesdesign.com
Windows 7 Ultimate-64bit
i7 975 3.3 GHz 8 cores
Corsairs 12Gb Ram
Radeon ATI 9870x2 Crossfire 2Gb
Ultra 1600 watt PS