Results 1 to 12 of 12
Thread: Chief vs ArchiCAD
-
11-10-2011, 11:50 AM #1
Registered User Promoted
- Join Date
- Nov 2008
- Posts
- 4
Chief vs ArchiCAD
What are some good sales points with Chief vs ArchiCad?
-
11-10-2011, 01:03 PM #2
This comparison is based on the time I switched - 4+ years ago. I found I was able to use more Chief features "Out of the box" than with Archicad. I never got to the point with Archicad where I was able to keep the elevations and sections live through he whole process. We always seemed to revert to CAD elevations and sections. Partially because it was cumbersome to control the lineweights and hatches. There were more settings to fiddle with in Archicad such as window trim (that appeared in plan or not depending on your selection), settings for how plans looked at different scales (ie less detail for 1/8" scale than 1/2" scale.) I found in general that the automated parts of Chief performed as I expected them to. Roof's are simple in Chief. Probably more, but my fingers are tired of typing.
Kevin Moquin, AIA, LEED AP BD+C
Portland Maine
Chief X5
Asus G74SX i7 2630QM @ 2.0 GHz, 12GB, GeoForce GTX560M 3GB, Windows 7
kma | kevin moquin architect
kma on Facebook
-
11-14-2011, 05:38 PM #3
Why is this question here in this forum?
Richard
---------------
Richard Morrison
Architect-Interior Designer
X6 Premier, Win8 64
http://www.richardmorrison.com
-
11-16-2011, 12:01 AM #4
Registered User Promoted
- Join Date
- Mar 2011
- Location
- Wasilla, Alaska
- Posts
- 799
Good call Richard. I wondered the same thing.
Michael
Chief Architect X3-X6
Windows 7
I5 Quad core 8 GB
NVIDEA Ge Force GT430
-
11-16-2011, 09:19 AM #5
Michael and Richard,
Though I wondered as you do about the offered question, it is still a valid one. If I wanted a studied opinion from someone who has and uses or used both ArchiCAD and Chief, this is where I would ask as well as the ArchiCAD forum.
Having an interest or curiosity is not a crime.
DJP
David Jefferson Potter
Chief Architect ® Trainer, Beta Tester, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Win7 Ultimate x64 & XP Pro x32, 500 Gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
Chief 7-X6, Home Designer versions 7-2014
3101 Shoreline Drive #2118, Austin, Texas 78728-4446
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel
Help is just an e mail or call away!
-
11-16-2011, 11:21 AM #6
I think the question was about the location of it in Curriculum Ideas, not the question itself.
Bryce Engstrom: Architect, LEED AP
www.engstromarchitecture.com
Chief X6 Beta
Sketchup Pro 6, Free 8, Thea Render, Lumion
Chief to Kerkythea & Thea Render Converter
-
11-16-2011, 01:56 PM #7
Bryce,
I would assume that L. Lucas is a teacher, a student or it was miss-located by the OP, in any case it seems an OK question to ask of Chief Users and as a fishing-expedition for possible users of both apps, like Kevin.
DJP
David Jefferson Potter
Chief Architect ® Trainer, Beta Tester, Draftsman, Author of "Basic Manual Roof Editing" and Problem Solver
Win7 Ultimate x64 & XP Pro x32, 500 Gb Samsung SSD
AMD Phenom II X6 1090T, 8Gb DDR3 RAM, PNY 760 GTX
Chief 7-X6, Home Designer versions 7-2014
3101 Shoreline Drive #2118, Austin, Texas 78728-4446
Office Phone:512-518-3161
Main E mail: david@djpdesigns.net
Web Site:http://djpdesigns.net
My You Tube Channel
Help is just an e mail or call away!
-
11-16-2011, 02:17 PM #8
Yes, my point was I don't think either Richard or Michael was questioning the validity of talking about another software here on Chieftalk, only that Curriculum Ideas was an odd place for it.
Bryce Engstrom: Architect, LEED AP
www.engstromarchitecture.com
Chief X6 Beta
Sketchup Pro 6, Free 8, Thea Render, Lumion
Chief to Kerkythea & Thea Render Converter
-
11-16-2011, 08:42 PM #9
Last edited by Justice; 11-16-2011 at 08:59 PM.
Manuel Trantalis.
1999 V6 to X5 2012.
Dell XPS 630i Q9400@2.66GHz,
Twin NVIDIA GeForce 9800 GT,
8GB Ram, 64bit Windows 7 Pro.
-
11-16-2011, 08:54 PM #10
Kevin Setting Defaults in AC is a bigger pain than in CA but you can do more with AC.
Setting Pen weights that correspond with elements is a nightmare in AC as windows and doors have different pens for different windows and door parts.
CA is simpler since all windows and door parts are not divided up.
AC is harder to learn than CA but I like both for different reasons.
CA X4 with its new mono slabs options is great time saver for me when it comes to drawing cross sections for slab houses, well done CA.
For me AC15 is way out of my domain with its shell tool and it has now become way too complicated and long winded especialy when it comes to freer form modeling.
So if you are doing houses that dont have fancy free form components, stick to Chief or you will get confused IMOLast edited by Justice; 11-17-2011 at 08:15 PM.
Manuel Trantalis.
1999 V6 to X5 2012.
Dell XPS 630i Q9400@2.66GHz,
Twin NVIDIA GeForce 9800 GT,
8GB Ram, 64bit Windows 7 Pro.
-
11-19-2011, 09:57 PM #11
Registered User Promoted
- Join Date
- Mar 2011
- Location
- Wasilla, Alaska
- Posts
- 799
-
11-29-2011, 10:44 PM #12
Registered User
- Join Date
- Nov 2011
- Posts
- 1