Results 1 to 15 of 15
Thread: Reflect CAD Blocks X3
-
10-29-2010, 04:11 AM #1Registered User Promoted
- Join Date
- Dec 2006
- Posts
- 342
Reflect CAD Blocks X3
in X2 i used to be able to use Transform/Replicate to flip my CAD block pitch labels left to right. When i perform the same action in X3 the numbers in the block are misaligned.
I've tried re-drawing all my pitch labels from scratch in X3 thinking maybe there was some issue using my old X2 blocks in X3 but it does the same thing.
Does anyone else have this problem? Is there something different i could be doing to avoid it? So far i've just be exploding the blocks after i flip them and that re-aligns the text but i dont want to do that everytime. The long way around would be to create a whole other set of labels for the reverse sides of the roof, but i dont want to do that either!Matthew
Chief Architect X3
Sketchup 8 Pro User
Intel i7 CPU 860 @ 2.80 GHZ
Windows 7 Pro 64 Bit
16 GB RAM
GE Force GT 240
-
10-29-2010, 04:12 AM #2Registered User Promoted
- Join Date
- Dec 2006
- Posts
- 342
Also, i checked to make sure my text option included "auto height" and "auto width" checked. So that doesnt seem to be the issue.
Matthew
Chief Architect X3
Sketchup 8 Pro User
Intel i7 CPU 860 @ 2.80 GHZ
Windows 7 Pro 64 Bit
16 GB RAM
GE Force GT 240
-
10-29-2010, 04:23 AM #3
Matt,
Is your text also center justified?
Just a thought.
JimThanks, Jim
www.eastbaydesign.net
East Bay Design, Inc
231.331.6102
-
10-29-2010, 04:48 AM #4
Could be the font you're using..
Just a guess.
Send it in, might be a bug...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
10-29-2010, 05:54 AM #5Charlie Heyn
- Join Date
- Apr 2009
- Posts
- 497
I've also had this problem, but in X2. I think it is affected by text, allignment, etc. . . I just unblock, and reblock and it's good. annoying, but it does straighten them.. Set up hotkeys for each function and it's faster. Or maybe we could figure out which justification was causing it, and we wouldn't have to do that . . why is it to easy just to work around and not take the time to fix....
-
10-29-2010, 06:49 AM #6Administrator
- Join Date
- Jan 2000
- Posts
- 4,161
The vertical alignment should not be affected by the reflection. Please contact support on things like this when you see them. At one point in time I spent a lot of time making this work correctly and am somewhat annoyed that it appears not to be working now.
Doug Park
Principal Software Architect
Chief Architect, Inc.
-
10-29-2010, 07:02 AM #7Charlie Heyn
- Join Date
- Apr 2009
- Posts
- 497
Will do, thanks doug. I will try to re-create this in x3 and see what happens.
-
10-29-2010, 07:15 AM #8Charlie Heyn
- Join Date
- Apr 2009
- Posts
- 497
I am sending it in now. Turns out that blocks created using text, not rich text, move around.
-
10-29-2010, 07:33 AM #9
I was playing w/ this this morning & couldn't reproduce it. So,I'll be keeping an eye on this also.
I'm not getting this behavior at all, regardless of plain or rich text, X2 (& earlier) CAD blocks brought into X3, or all X3...justification doesn't matter either.
I'm suspicious of the font. I tested 2 fonts, Arial & Country Blueprint.
JimThanks, Jim
www.eastbaydesign.net
East Bay Design, Inc
231.331.6102
-
10-29-2010, 07:39 AM #10Registered User Promoted
- Join Date
- Dec 2006
- Posts
- 342
Are you guys using the mirror function or the transform replicate function? Is there a difference in the end result?
I use Transform/Replicate to reverse my block, the vertical line i drew in my initial post was just a seperator, just to be clear, i'm using transform/replicate and getting the misalignment.Matthew
Chief Architect X3
Sketchup 8 Pro User
Intel i7 CPU 860 @ 2.80 GHZ
Windows 7 Pro 64 Bit
16 GB RAM
GE Force GT 240
-
10-29-2010, 07:43 AM #11Charlie Heyn
- Join Date
- Apr 2009
- Posts
- 497
I as well used the transform/replicate function. Copy original BLOCK (make sure that you aren't just group selecting items - - block them first, then reflect ) The text used in my sample was Chief Blueprindt.
-
10-29-2010, 07:48 AM #12Charlie Heyn
- Join Date
- Apr 2009
- Posts
- 497
okay, again, X2 12.6.0.25 Tried using other texts, including arial. still moves.
-
10-29-2010, 07:50 AM #13Charlie Heyn
- Join Date
- Apr 2009
- Posts
- 497
Jim, try this plan for me would you. See if it does what we are saying. This is the plan I sent into tech support.
-
10-29-2010, 08:38 AM #14
Tundara,
I opened your plan & sure enough, I got the same thing.
I think it's the top/bottom margin settings. When I selected the block, I noticed the red outline of the text boxes didn't change, but the text moved to the top of that red text box. When I zeroed out the top/bottom margins, it copied/reflected as it should.
My top/bot margins are zero by default.
JimLast edited by ebdesign; 10-29-2010 at 08:44 AM.
Thanks, Jim
www.eastbaydesign.net
East Bay Design, Inc
231.331.6102
-
10-29-2010, 08:54 AM #15Charlie Heyn
- Join Date
- Apr 2009
- Posts
- 497
Funny, I had looked there during my tests to see if something was amiss, but assumed since the margins were equal that this would not affect it. When I set mine to zero, it worked correctly for me as well. So it is the relationship between the plain texting and the margins. I will have to correct my default settings, . . that's for sure.