Framing alignment problem?

[BOB JOHNSON]

1. Set the framing reference mark at the outside corner of an end and side walls.

2. Set both wall studs and roof rafters at 24" o.c.

3. Ran automatic framing.

4. The distance from the outside edge of the end wall, to the center line of first stud on the side wall, is 24".

5. The the outside edge of the first rafter is aligned with the outside edge of the end wall and the distance from that edge to the center line of the second rafter is 24 3/4".

How to correct the misalignment?

The rafters on both end of the HIP ROOF align with the outside edges of the end walls.

Thanks in advance, Bob X2