Results 1 to 5 of 5
Thread: cathedral ceiling crown molding?
Hybrid View
-
02-05-2010, 02:05 PM #1
cathedral ceiling crown molding?
Anyway to put crown molding cathedral or vaulted ceiling in X2? I could have sworn I use to be able to do this in 3d mode just draw a molding line and bring it up on an angle to match ceiling, now when I try to move it it moves perpendicular to the floor and juts out as an angle from the wall not the floor.
-
02-05-2010, 02:16 PM #2
Use 3D molding polylines. you can break them in elevation just like a plain polyline.
Thanks, Jim
www.eastbaydesign.net
East Bay Design, Inc
231.331.6102
-
02-07-2010, 09:58 AM #3
Must be doing something wrong, when I try moving them they move at an angle to the walls not to the floor and ceiling. I just can't seem to "lift them up," so to speak they move relative to the level floor plain.
-
02-07-2010, 02:40 PM #4
it's a snap
try this: http://www.chieftutor.com/ceiling/
apply molding to a vaulted ceiling
TREESPoT
-
02-11-2010, 07:05 PM #5
ebdesign & treespot it was so easy even I can do it.
treespot the video helped big time I went from being to a BIG THANKS!