Results 1 to 15 of 26
Thread: Wainscoting help PLEASE!!
Hybrid View
-
09-27-2009, 11:01 PM #1Registered User Promoted
- Join Date
- Mar 2007
- Location
- Bay Area, California
- Posts
- 1,334
Ok heres my latest attempt at finding what I want. I customized the paneled wainscoting to the panels out of the chief cabinet doors. Then I put two panels side by side and turned them into a molding through the 3d symbol maker.
I tried having the molding at the bottom and at the top but the problem with that is the moldings wrapped and caused large spaces between the panels... that didnt work.
Then I decided I could use a base molding through the dbx lets say 6", then use this molding in the picture as a "chair rail molding" and use a crown molding and low it to cap the top of this molding. Then if I wanted a crown molding I had to go and do a molding polyline and adjust it.
So yes all that just for wainscoting. Now my only problem is the panels are missing beneath the windows. It seemed that the chair molding was the only choice out of the three in the DBX (crown, chair, base) that would cut the spaces out for doors and windows. The other two just ran straight across all doors and windows.
So thats the only part now that is missing is beneath the windows, I guess I could manually apply those. Im really hoping a chief expert from corporate will chime in here and give us a secret recipe for a really easy way to make these work!!Chad Cardin
MEMBER SINCE V9... NOW X5