Results 1 to 15 of 26
Thread: Wainscoting help PLEASE!!
Hybrid View
-
09-27-2009, 01:24 AM #1
Registered User Promoted
- Join Date
- Mar 2007
- Location
- Bay Area, California
- Posts
- 1,334
Wainscoting help PLEASE!!
Is there anyway to apply wainscoting besides just using the individual panels?
Im trying to apply it to a library which of course has windows and its not like base molding that cuts where doors/windows/doorways are. I was expecting something like crown/base/chair moldings with intelligent behaviors but ITS NOT!!!
Im frustrated because if you do it by panels or even stretching it and then click on double or triple it ends up with a bunch of mixed matches sections that arent equal in size.
I tried doing a room molding, wall covering and many other attempts but most of them you cant even choose wainscoting for a choice! Ive never had to use wainscoting in my designs before and now Im grateful I never have because these are cumbersome.
I understand that wainscoting isnt a molding according to chief but it should be since it lines the room very similarly. I must be missing something here because all other moldings are easier to apply!
Thanks.Chad Cardin
MEMBER SINCE V9... NOW X5
-
09-27-2009, 01:52 AM #2
Chad
How detailed do you need it?Would the wall covering work?
Just a thought, use pony wall and have the bottom with it so it shows as a thicker wall..........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-27-2009, 03:09 AM #3
Can you do paneled (stiles/rails) wainscot with wall coverings Allen?
__________________
Jay F.
Carpenter/Remodeler/Cleaning lady
X4: 14.2.078x64
Win7 Pro 64-Bit
Intel i-7 930 @ 2.8GHz
12GB DDR3 ram
Nvidia GeForce GTX470 - 1GB
(don't ask me what any of that means)
2 dogs & 1 wife (so far)
http://www.CraftsmenCarpentry.com/
-
09-27-2009, 03:59 AM #4
Jay
Wall covering is more just a paint on a section of the wall.
Not sure if there is an easy/fast way to get the 3d model..
Mostly depends on what is needed for how much time you want to spend on it...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-27-2009, 06:17 AM #5__________________
Jay F.
Carpenter/Remodeler/Cleaning lady
X4: 14.2.078x64
Win7 Pro 64-Bit
Intel i-7 930 @ 2.8GHz
12GB DDR3 ram
Nvidia GeForce GTX470 - 1GB
(don't ask me what any of that means)
2 dogs & 1 wife (so far)
http://www.CraftsmenCarpentry.com/
-
09-27-2009, 04:52 AM #6Im trying to apply it to a library which of course has windows and its not like base molding that cuts where doors/windows/doorways are. I was expecting something like crown/base/chair moldings with intelligent behaviors but ITS NOT!!!
What I am saying, and I think this is true, you can not make a pline and then convert it to a molding and expect it to cut for doors and windows. You must first select the room and make a pline molding out of that.
Once you have the room pline molding you need to select the molding to be applied and that is in one of the libraries.
Again I am going off of my poor memory, but I believe all of this is explained in an online tutorial.D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
09-27-2009, 05:10 AM #7
The problem with using the molding method is that you will need two--one for window height, and another for below window height.
I've never used paneled wainscot, but I've done beadboard using both the pony-wall (10) and the wall-covering (X1) method. Actually, if I wanted paneled wainscot, I'd be experimenting with the cabinet tools.
-
09-27-2009, 06:21 AM #8
You might try using the soffit tool as I do for bathroom wall tile. Edit the thickness, height from floor and the height, don't know how it will take to actual wainscott but it works fine for bead board.
Doug Michel
General Contractor
Design & Build, New Jersey
Windows 7... 64 Bit,
X6 Build 16.1.1.9 X64 w/SSA
X5 Build 15.2.1.3 X64 w/SSA
X4 Build 14.3.2.2 X64 w/SSA
X3 Build 13.4.2.7 w/SSA
X2 Build 12.6.0.25 w/SSA
X1,V10,V9
Sketch Up Pro 8
AutoCad 2014
Adobe CS6 Design Premium
A Pool Cue , a Harley, a Hammer & a Camera
Good Isn't Enough... When Better is Possible.
-
09-27-2009, 06:23 AM #9
I think Dshall has the right answer..
Hello Jason, how have you been?.........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-27-2009, 07:46 AM #10
Panels decision
Your privacy is important to us, your personal details will handled discreetly, and will not be shared with anyone except the CIA, FSB, MI6 or similar, then they will be placed on a USB stick and left on a bus.
-
09-27-2009, 09:04 AM #11
Dean
- Join Date
- Jul 2007
- Location
- NW Florida
- Posts
- 496
I don't see any problem with the Chief panels.
DeanDean Miller
Freeport Florida
x1 / X2 Trial.2005 HP Pavilion
dv 4000 series XP SP2
1.6 GHv celeron 512 MB
Intel 950 video(integrated)
-
09-27-2009, 10:10 AM #12
I wanted to try it.
Wall on the left has "wall covering"
Right is a "Pony wall"
I used a "Room Molding" for the chair rail.
That cuts out for door and windows..
Only difference is if you look at the window casing..
Doing panels might be harder...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-27-2009, 10:22 AM #13
With just a picture of cabinet doors for material..
Not very good..
Maybe Pat could make it look nice..........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-27-2009, 12:00 PM #14
Registered User Promoted
- Join Date
- Mar 2007
- Location
- Bay Area, California
- Posts
- 1,334
I guess I should have been a bit more detailed in my description. Yes the beadboard and wall covering works great! However when it comes to the double paneled or just paneled wainscoting, thats another issue.
I havent tried the pony wall tool yet I will try that. I found that both the wall covering and polyline tool works great EXCEPT when dealing with paneled wainscoting.
I cant figure another way to do it that looks nice and even, meaning the panels are evenly sized. I tried stretching it (like a cabinet) and selecting double or triple but even then it turns out looking strange.
Does anyone know if theres another way to do wainscoting PANELING besides placing the tiny sections individually? I know there must be a more efficient way.
Thanks.Chad Cardin
MEMBER SINCE V9... NOW X5
-
09-27-2009, 12:07 PM #15x4
SNEAK PEAK-service will be available soon. http://www.3d-diva.com/page1_360panorama.html
FREE TEXTURES available and rendering information at: www.3D-Diva.com
Fort Worth Texas