Results 1 to 5 of 5
Thread: Wall Definitions
-
05-14-2009, 10:20 AM #1
Wall Definitions
- Anyone else experiencing confusion with wall definitions - indicates the proper definition in dbx but in fl pln is not the same - - exterior wall changed to dotted lines for porch header that dbx correctly defines but fl pln has solid lines.....
-
05-14-2009, 11:05 AM #2
Mike:
I haven't experienced this behavior myself. If you can't figure it out, you might run it by Tech Support.Curt Johnson
X5
Puget Systems Custom Computer, Win 7 Pro 64-bit SP1, 3.3Ghz Intel Core i5 2500K Quad, 8 GB Kingston DDR3-1333 Ram, Intel X25-M 80 GB SSD App Drive, WD 500 GB Caviar Blue SATA 6 Gb/s Data Drive, EVGA GeForce GTX 550 Ti 1024MB VC, Antec 650W PS, Asus p8P67 Pro REV 3.0 Motherboard
-
05-14-2009, 01:19 PM #3
- Should have included thumb - the dbx has the right wall but fl pln shows something different - just ready to print plans and somehow will fudge it.....
-
05-14-2009, 10:48 PM #4
Mike,
Go to the Wall Type Definitions dbx and check the status od the By Layer setting for the line style.Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
05-15-2009, 06:40 AM #5
- Glen, thanks - found last nite that though the dbx had correct wall the layer assignment for the particular wall in plan was diff. than the others and apparently the layer overrides the definition....