Results 1 to 4 of 4
Hybrid View
-
02-26-2014, 12:09 PM #1Registered User Promoted
- Join Date
- Jan 2013
- Posts
- 1
I have a problem along these lines I could use help with...
I am drawing plans for several houses being built in a cul-de-sac, I would like to copy all of the finished houses into one master site plan, showing the plot locations etc. as well as a 'streetscape' of how the finished scenario will look. I have done this before, with a straight street quite easily with the method mentioned above.
My problem with working on the cul-de-sac, is that I will have to rotate each house slightly (around a curve). Moving and adjusting entire houses with the 'EDIT/ALL FLOORS' makes me cringe but I might have no other choice. I would think there is the ability to possibly 'block' an entire house? Maybe? Maybe, Cross referencing from one file to a master file... maybe not possible. I am stumped
Any help would be much appreciated
Brent
-
02-26-2014, 06:14 PM #2
Brent:
you should post your query in the new chieftalk forum
this one is closing to postings on Thursday
short answer, create a symbol of each building and place the symbol in the master plan
then rotate as needed
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)