Results 1 to 14 of 14
Thread: Back Clipped Cross Section
-
09-24-2008, 07:07 AM #1
Back Clipped Cross Section
If I remember correctly, at one time I was able to select a back clipped cross section camera in plan view, open dbx and change the "clip surfaces within" distance. Am I missing something? I can not do that now.
However, if I open a brand new plan I can select the camera.
So it is in this plan I am working in. Again is there a setting I might be missing? ThanksD. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
09-24-2008, 07:09 AM #2
Are you on the same floor that the camera was created on? If not, you may not be able to select the camera.
Allen Brown
Indy Blueprints
Residential & Commercial Designs & Drafting Service
V8-X4, Specializing in Plan Completion, Problem solving, & Chief Architect Training.
Free Chief Architect Training Videos:
www.IndyBlueprints.com
Need help on a plan? Or 1 on 1 instruction? Email or call.
www.UBuildItIndy.com
-
09-24-2008, 07:14 AM #3
Yes, I am on the same floor. I even changed floors and was unable to select camera. Any other ideas?
D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
09-24-2008, 07:24 AM #4
If it's not on a locked layerset, try closing the program and re-opening. Has the camera been sent to layout? If so, can you access it through layout?
Allen Brown
Indy Blueprints
Residential & Commercial Designs & Drafting Service
V8-X4, Specializing in Plan Completion, Problem solving, & Chief Architect Training.
Free Chief Architect Training Videos:
www.IndyBlueprints.com
Need help on a plan? Or 1 on 1 instruction? Email or call.
www.UBuildItIndy.com
-
09-24-2008, 07:27 AM #5
Some times if I click on the camera tool first,it helps to select one in plan..
.........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-24-2008, 07:56 AM #6Some times if I click on the camera tool first,it helps to select one in plan.
If it's not on a locked layerset
ry closing the program and re-opening. Has the camera been sent to layout? If so, can you access it through layout?
Yes the camera has been sent to layout
Yes I can open the view from layout and when I do the camera in plan view changes from green to blue and I cannot select a blue camera, I can only select green cameras. And as I said if I select the green camera, open dbx I cannot change backclip distance(it is set at 1")D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
09-24-2008, 08:04 AM #7
You must have both views open to set the distance(plan and elevation). Then select the camera in the plan view. Set the back clip after distance.
...and the distance is measured from the camera line going out the direction the camera is facing.
Most do not realize that this can be set very precisely. Both position in plan and distance of view.
If you still have trouble with it please send it to me and I would be happy to take a look.Last edited by louis; 09-24-2008 at 08:26 AM.
-
09-24-2008, 09:24 AM #8Most do not realize that this can be set very precisely..........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-24-2008, 09:41 AM #9
Scott,
Your default cad layer is off in that set.
-
09-24-2008, 09:47 AM #10Your default cad layer is off in that set.
Summation: both plan view and the back clipped view must be open AND default layer for the plan has to be on. WOW! Now I can not only select camera but I can also specify the back clipped distance!D. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
09-24-2008, 11:15 AM #11Might be a good class subject..
I don't think it needs a class...worlds shortest class. Hasn't Wendy covered this in her sexy elevation thing.
-
09-24-2008, 11:24 AM #12
Louis
It might be a short class,but that is the thought of thing I would have taken you up on with your free offer before.
The tutorials have very little on that kind of thing,unless XI has more.
Wendy has the right idea doing actual work related classes,not just how to use Chief..
But how to use Chief to make money..
I'm getting better,but know that I need work on making layouts for other people to work from..Much easier to do them when I'm building the job..........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
09-24-2008, 11:30 AM #13
Allen,
This has been coved in just about every class I have taught over many years.
What do you want to know or did she cover it?
I have been using real working models in classes for years. I don't use any plans provided by Chief.
I doing a class now on plan work where all students are working on their plans.
...or attend our users group for free.
-
09-24-2008, 01:00 PM #14
Hi Louis
My main problem with cross sections was I was trying to get to detailed..
Wendy did show a good way to make elevation views look much better.
I am hoping there is room for your users group meeting this time to..
Wouldn't take the spot of someone that lives there...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4