Results 1 to 14 of 14
Hybrid View
-
04-13-2008, 08:09 PM #1
Windows Opaque - Render vs Elevation
I always set the glass in windows (and doors) to dark gray.
This works fine for render view in this project but not for an elevation ???
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
04-13-2008, 10:30 PM #2
Lew,
The setting that controls window transparency in vector views is 3D...3D Settings...Vector View Options...Opaque Glass From Outside.
It looks like you already have this checked because you have opaque glass on the upper floor.
I think the reason that this setting is not applied to your lower floor glass is that those windows open onto a room (verandah).
You need to define the verandah area as an external room definition or Chief thinks that the windows are internal and won't apply the opaque setting to them.
Try naming the verandah a deck or porch, rebuild f/c.Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
04-14-2008, 05:27 AM #3
Glenn:
I didn't use the opaque setting.
I appy dark grey to each window using the spray can.
I'll check into why the veranda is causing this issue.
I have a window in front doing the same thing but I thnk it is because of the front entry porch ???
This is starting to look like a "bug"
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
04-14-2008, 05:51 AM #4
The veranda was already set to "porch".
Some windows in the front are having the same issue and they are not part of a porch or deck ???
Why do they show up fine in render mode but not in elevation ???
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
04-14-2008, 06:03 AM #5
Ok, I opened each window not showing dark gray and selected the material tab and then the glass. The dark gray showed, then I clicked ok and ok to close the material dbx and then the window would display dark gray.
This is definitely a bug and I'll send the "buggy" plan into tech support.
I also found that using the eyedropper/spray can would not make the dark gray appear either when in elevation mode ???
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
04-14-2008, 02:43 PM #6
Lew,
I think this is related to another thread I posted regarding window transparency.
Chief automatically handles window glass differently than the materials own settings. ie, if you have a default glass material and adjust its properties, Chief will overide these settings because it applies it's own values when the material is set as window glass.
Select a window that you are having the problem with. Open it's dbx and go to the Materials tab, click on Glass.
At the top, does the material say Default: "my glass material".
Now open a window that you are not having a problem with. At the same place, does it just say "my glass material". Note: in this case there is no "Default" wording before the material.Glenn
Chief X5
www.glennwoodward.com.au
Windows 7 - Home Premium
Intel i7-920
Gigabyte GA-EX58-UD3R
6 Gb DDR3 1600MHz
EVGA GTX285 1GbDDR3
1TB Sata HD
-
12-14-2012, 06:35 PM #7Registered User Promoted
- Join Date
- Aug 2012
- Location
- London commuter-land
- Posts
- 227
Bump. Tried preferences, specifying panes as grey instead of glass, flipping door opening direction, room def, etc. Occurs with bifold glass doors with vector elevation, just refusing to be opaque so all the indoor stuff is showing - mess! - another glass door and window in the same room are behaving fine.
Andy
London, UK
X6
Property Development
xxxxxx
Dell XPS
O/S: Windows 7 64bit
Processor: 2nd generation Intel Core i7-2670QM 2.20 GHz with Turbo Boost up to 3.10 GHz
Memory: 16GB 1600 DDR3
Screen: Dual 15.6" 1920x1080 and 28" 1920 x 1200
Graphics: 2GB NVIDIA GeForce GT 540M
Coffee: Lavazza
-
12-14-2012, 07:34 PM #8
Andy:
try this thread:
http://www.chieftalk.com/showthread....ghlight=Opaque
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)