Results 1 to 15 of 21
Thread: Showing Floor Patterns
-
02-16-2008, 02:40 PM #1
Rob Fisher
- Join Date
- Nov 2004
- Location
- Medicine Hat, Alberta, Canada
- Posts
- 1,290
Showing Floor Patterns
Here is a procedure to allow the display of flooring patterns in your floorplan view without drawing any CAD.
1. Assign floor patterns in the materials tab of the room definition dbx. Shift the patterns in the X or Y direction by adjusting the origin in the pattern tab.
2. Generate a “Vector Floor Overview” camera, and then select “Top View”. You should see your floor patterns.
3. Select ”Cad Detail From View”. Think of this command as a snap shot of your screen, with the result stored in a 2D Cad Detail Window.
4. Now turn off “Default Cad Layer Lines”, leaving only the floor pattern lines showing. Block these patterns and assign the block to a new layer called “Floor Patterns” change the color to gray, and select "Back Group".
5. Copy the block, then return to the plan window and click “Paste Hold Position”. Floor patterns can now be turned on or off with the “Floor Patterns” layer. (Not all the lines are showing on this "screen capture".)
NOTES:
1. If advanced deck framing was used as in this example, it must be selected in the Cad Detail and assigned to the Default Cad Layer Patterns layer before turning off Default Cad Layer Lines.
2. Countertop patterns may project outside of the base cabinet face. This is a result of the overview camera seeing the full countertop including the overhang. We could select these overhang lines and add them to the Default Cad Layer Patterns layer as well. Alternatively, we could set the default countertop O/H to 0” before starting as I did here.Rob Fisher
X3, Win XP
Composite Hockey Stick
Former Oilers and Flames fan
-
02-16-2008, 03:28 PM #2
Registered User Promoted
- Join Date
- Dec 2003
- Posts
- 290
Rob,
Great tip! I've always used swatches of flooring to indicate type of and direction, but wasn't fond of too much clutter on plans. However, since I've discovered that everything coming out of my printers is now gray scale with my conversion to X1, I'll be inclined to give it a try.
Thanks,
Kelly
-
02-16-2008, 04:29 PM #3
I have to admit something....why would you not just turn on the room fill patterns and set the color to light gray?
Why all the extra steps? I am surly missing something!Joey R. Martin,aibd,cgp,cga,caps
Martin Design & Planning
Elwood, Indiana
Cell. 765-860-3567
eMail. joeymdp@gmail.com
-
02-17-2008, 05:08 AM #4
Joey
I am wondering the same thing..
The person posting makes me thing we are missing some thing..
Another KAT from Canada...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
02-17-2008, 05:43 AM #5
I may be wrong but isn't Rob's method useful to show floor pattern direction ?
I can also see where you could have multiple floor patterns on separate layers and then easily switch between the various floor patterns ?
Maybe I missed the boat ???
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
02-17-2008, 09:34 AM #6I may be wrong but isn't Rob's method useful to show floor pattern direction ?
Come on Rob, what gives....what am I missing...Joey R. Martin,aibd,cgp,cga,caps
Martin Design & Planning
Elwood, Indiana
Cell. 765-860-3567
eMail. joeymdp@gmail.com
-
02-17-2008, 10:26 AM #7
Rob,
I noticed in your stairwell you are showing a handrail, is this a cad line or mline or did CA do this automatically, Thanks for the input
-scottD. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
02-17-2008, 10:28 AM #8
Scott, it id showing in the first picture, because it is a vector floor overview shot.
Allen Brown
Indy Blueprints
Residential & Commercial Designs & Drafting Service
V8-X4, Specializing in Plan Completion, Problem solving, & Chief Architect Training.
Free Chief Architect Training Videos:
www.IndyBlueprints.com
Need help on a plan? Or 1 on 1 instruction? Email or call.
www.UBuildItIndy.com
-
02-17-2008, 10:28 AM #9
Rob,
Sorry for another stupid question, but how did you get the base cabinet fill, is that a fill pattern you added or am I missing something in the cab dbx.
-scottD. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
02-17-2008, 10:30 AM #10
I believe the "cabinet fill" you are referring to is the counter top pattern.
Allen Brown
Indy Blueprints
Residential & Commercial Designs & Drafting Service
V8-X4, Specializing in Plan Completion, Problem solving, & Chief Architect Training.
Free Chief Architect Training Videos:
www.IndyBlueprints.com
Need help on a plan? Or 1 on 1 instruction? Email or call.
www.UBuildItIndy.com
-
02-17-2008, 10:31 AM #11it id showing in the first picture, because it is a vector floor overview shot
-scottD. Scott Hall (The Bridge Troll)
San Diego, Ca.
Chief X-5 w/ Win 7
Asus P6T X58 ATX Core i7
Intel Core i7 920
6GB (3X2) DDR3 1600
NVIDIA GeForce 580 GTX
The videos we watch are not 100% gold, but if we find a gold nugget, the time spent viewing has a value.
We can please some of the people some of the time, but we can't please all the people all of the time..... but I will keep trying.
If you are interested in keeping abreast of any new videos, please subscribe to my channel at YOUTUBE...... channel is ds hall
-
02-17-2008, 12:20 PM #12
Registered User Promoted
- Join Date
- Dec 2003
- Posts
- 290
Originally Posted by joey3032
I've never messed with room fill style because it was something that I haven't been interested in, but You are right, with the exception if you don't have cab. plan fill turned on, something I don't do because I use a darkened background.
That being the case I'm not sure that Rod's method wouldn't be quicker than going back and turning on plan fill as needed.
So good tip to you too Joey!
Kelly
-
02-17-2008, 12:53 PM #13
I use fill for showing headroom in attics.
http://www.chieftalk.com/showthread....light=headroom
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)
-
02-17-2008, 01:43 PM #14
Registered User Promoted
- Join Date
- Dec 2003
- Posts
- 290
Lew,
Interesting, how do you take out the slope ceiling part of the room that falls below the code - habitable room height of 7'.
I bring this point up because I have always felt that one should not have to pay property taxes on floor footage that falls out of the habitable range, not to mention paying for a permit based on sq.ft.
Kelly
-
02-17-2008, 02:20 PM #15
Kelly:
set the room(s) ceiling height to 6' 8" and then Chief will create "wall beams" I place invisible walls over the "wall beams" and then set the ceiling hights back as needed.
I would like Chief to do this automagically for us
LewLew Buttery
Castle Golden Design - "We make dreams visible"
Lockport, NY
716-434-5051
www.castlegoldendesign.com
lbuttery at castlegoldendesign.com
CHIEF X5 (started with v9.5)