Results 1 to 3 of 3
Thread: X11.4 didnt do...
-
01-11-2008, 08:34 AM #1Registered User Promoted
- Join Date
- Dec 2006
- Posts
- 342
X11.4 didnt do...
I can see that the corner boards are NOT fixed in the latest patch
I guess i'll keep the working around this with polyline solids/slabs...
I still cant adjust the top or bottom values without the cornerboard jumping to an inside corner or dissapearing all together, only to find it later on some remote attic wall...
D'oh!Matthew
Chief Architect X3
Sketchup 8 Pro User
Intel i7 CPU 860 @ 2.80 GHZ
Windows 7 Pro 64 Bit
16 GB RAM
GE Force GT 240
-
01-11-2008, 08:39 AM #2Registered User Promoted
- Join Date
- Nov 2005
- Location
- Norcross, GA
- Posts
- 701
Have they acknowledged this problem? Knowing you have a problem is the first step to.... Does your millwork (brackets.. etc) jump up on their own? In 10.08. mine do.
-
01-11-2008, 08:49 AM #3Special Projects Director
- Join Date
- May 2003
- Posts
- 3,113
Corner boards work better in 11.4. The problem is usually worst when you place them on the corner of a dormer that is aligned with an exterior wall. The best solution in this case is to place the dormer one floor up on the attic level.
Dan Park,
Special Projects Director,
Chief Architect