Results 1 to 8 of 8
-
09-26-2007, 06:26 AM #1Registered User Promoted
- Join Date
- Sep 2007
- Posts
- 4
Changing Material in Kitchen Cabinets
Is there a way to change all the materials(color) of all kitchen cabinets in a design without manually changing each cabinet?
-
09-26-2007, 06:30 AM #2
Cabinet defaults.
Richard
---------------
Richard Morrison
Architect-Interior Designer
X6 Premier, Win8 64
http://www.richardmorrison.com
-
09-26-2007, 06:30 AM #3
Yes, hold down the shift key to multiple select cabinets (either clicking on each one or marquee, shift/drag select) and then open them all up and change them in the materials tab.
Bryce Engstrom: Architect, LEED AP
www.engstromarchitecture.com
Chief X6 Beta
Sketchup Pro 6, Free 8, Thea Render, Lumion
Chief to Kerkythea & Thea Render Converter
-
09-27-2007, 08:58 AM #4
Also, look at the new material painter tools in X1.
Dermot Dempsey
Principal Software Engineer
Chief Architect, Inc.
http://www.ChiefArchitect.com
http://www.HomeDesignerSoftware.com
-
09-27-2007, 09:01 AM #5
In full height cabinet mode, drag a marquis which covers the cabinets you want to change, then make the changes.
Curt Johnson
X5
Puget Systems Custom Computer, Win 7 Pro 64-bit SP1, 3.3Ghz Intel Core i5 2500K Quad, 8 GB Kingston DDR3-1333 Ram, Intel X25-M 80 GB SSD App Drive, WD 500 GB Caviar Blue SATA 6 Gb/s Data Drive, EVGA GeForce GTX 550 Ti 1024MB VC, Antec 650W PS, Asus p8P67 Pro REV 3.0 Motherboard
-
11-11-2008, 09:54 AM #6Registered User Promoted
- Join Date
- Aug 2008
- Location
- St. Louis
- Posts
- 36
I am holding shift and then I have selected the cabinets but they won't open. It just "flashes" without open the material window.
I am trying to select base cabinets, partition walls and full height cabinets...
Any suggestions?Jillian
Chief X5 on Windows 7 HP EliteBook 8540p
-
11-11-2008, 10:25 AM #7
material painter room mode.
Dennis Gavin CR, CKBR
Gavin Design-Build
Media, PA.
610-353-8890
X5
-
11-11-2008, 10:59 AM #8
Jillian:
If you are following the procedure I suggested, you have to make sure that in cabinet mode you have the full height cabinet selected. Perhaps one of the other suggestions would work more easily for you?Curt Johnson
X5
Puget Systems Custom Computer, Win 7 Pro 64-bit SP1, 3.3Ghz Intel Core i5 2500K Quad, 8 GB Kingston DDR3-1333 Ram, Intel X25-M 80 GB SSD App Drive, WD 500 GB Caviar Blue SATA 6 Gb/s Data Drive, EVGA GeForce GTX 550 Ti 1024MB VC, Antec 650W PS, Asus p8P67 Pro REV 3.0 Motherboard