Results 1 to 3 of 3
Thread: bottom stair tread
-
11-12-2008, 02:30 AM #1
bottom stair tread
Think I found a way to get the bottom riser taller to make up for the finish floor with less workarounds.
Use a landing under the first step=3/4" tall.
Picture 2 has the landing with Open,no material.
I used a fill to see the landing for here..
This is no way gets rid of wanting finish floors in Chief...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
11-12-2008, 03:52 AM #2
Allen,
Good thinking.
I sure hope X2 fixes this to avoid the workaround.Don
CA Premium X6 (16.1.1.9x64) SSA
Intel i7-4770 (8M Cache) @ 3.4GHz; Windows 8.1 - 64 Bit; 16GB DDR3 (1600MHz);
NVIDIA GeForce GTX 670;
Dual HD Monitors (24" and 22");
Primary Hard Drive: 256GB SSD.
-
11-12-2008, 04:16 AM #3
Thanks Don
Hopefully it does work.
Some times my ideas only seem like they are good ones...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4