Results 1 to 3 of 3
-
08-19-2008, 07:04 AM #1Registered User Promoted
- Join Date
- Nov 2002
- Posts
- 314
Gable End Double Roof Match Window
I am using V10.8a.
I have a cabin and need to make a gable end window where both sides of the top match the roof.
I can convert a fixed glass windowto match one side of the roof with the "match roof" in the shape box. Next I would like to reflect that so the top of the window is a triangle with both angles matching the roof. Roof pitch is same on both sides.
Thanks in advance,
Ed Orum
-
08-19-2008, 08:17 AM #2
Start with a fixed window, open the window DBX, under the shape tab, set the left and right heights at some numer lower that the overall ht (that number will vary depending on the slope of roof and width of window), place a check in "Top left corner" place the full ht # in the "Height" box, and 1/2 the width in the "From" box. Do the same for the "Top right Corner".
BTW, this is the same for V10 & X1.Allen Brown
Indy Blueprints
Residential & Commercial Designs & Drafting Service
V8-X4, Specializing in Plan Completion, Problem solving, & Chief Architect Training.
Free Chief Architect Training Videos:
www.IndyBlueprints.com
Need help on a plan? Or 1 on 1 instruction? Email or call.
www.UBuildItIndy.com
-
08-19-2008, 09:00 AM #3Curt Johnson
X5
Puget Systems Custom Computer, Win 7 Pro 64-bit SP1, 3.3Ghz Intel Core i5 2500K Quad, 8 GB Kingston DDR3-1333 Ram, Intel X25-M 80 GB SSD App Drive, WD 500 GB Caviar Blue SATA 6 Gb/s Data Drive, EVGA GeForce GTX 550 Ti 1024MB VC, Antec 650W PS, Asus p8P67 Pro REV 3.0 Motherboard