Results 1 to 9 of 9
Thread: Protusions
-
03-15-2007, 03:30 AM #1
Protusions
Any Ideas as to what might be causing this, see attatched. I'v tries I think everything to get rid of it, new wall, set the ceiling back down to default height, then moved it up again.....
Thanks for any advise.
DougDoug Michel
General Contractor
Design & Build, New Jersey
Windows 7... 64 Bit,
X6 Build 16.1.1.9 X64 w/SSA
X5 Build 15.2.1.3 X64 w/SSA
X4 Build 14.3.2.2 X64 w/SSA
X3 Build 13.4.2.7 w/SSA
X2 Build 12.6.0.25 w/SSA
X1,V10,V9
Sketch Up Pro 8
AutoCad 2014
Adobe CS6 Design Premium
A Pool Cue , a Harley, a Hammer & a Camera
Good Isn't Enough... When Better is Possible.
-
03-15-2007, 03:38 AM #2Registered User Promoted
- Join Date
- Nov 2006
- Posts
- 331
wild guess, but maybe the header of the garage door? Does it goe away if you don't generate framing?
-
03-15-2007, 04:00 AM #3
Did you Rebuild Walls/Floors/Ceilings (F12)?
ZoomeDan Stauffer
440.221.4281 Mobile
Victor Residential Design and Marketing
Victor Web Design
dws@twinsburg.com
Chief Ver 10.08a, X1
Do I need X2?
-
03-15-2007, 04:10 AM #4
Hi Doug
Try glass house view,delete surfaces and the rainbow tool to see what the material is..
If it needs a quick fix,paint it "Open,no material"but that is not a good thing to do for a permanent fix...........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
03-15-2007, 04:30 AM #5Registered User Promoted
- Join Date
- Jan 2007
- Posts
- 16
Doug try turning the crown molding off and see if that helps, I had the same problem a while back.
-
03-15-2007, 11:52 AM #6Registered User Promoted
- Join Date
- Nov 2006
- Location
- Vancouver, Canada
- Posts
- 130
I also had a similar problem and in my case I deleted an attic wall (go one level up) - end of "gable wings"
Cristian Cambiazo
Vancouver, BC.
X3
www.cambiazodraftinganddesign.com
http://www.cambiazodraftinganddesign.blogspot.com/
-
03-15-2007, 01:12 PM #7
Thanks everyone, Hey Allen, Hows everything? Sooooo....Cristian gets the winning prize. What it was , was a second or should I say a 1st gable(attic wall) Originally the ceiling height was 8'. with that wall being checked as a gable wall. Then I raised the ceiling to 9' and CA created ANOTHER gable (attic) wall. The attic wall that was creating the protrusion was the one from when the ceiling height was at 8'. when I moved it up and hit F12 for rebuild, CA left the original attic wall in place. I deleted the longer of the 2 and all is great.
Thanks everyone for your suggestions.Doug Michel
General Contractor
Design & Build, New Jersey
Windows 7... 64 Bit,
X6 Build 16.1.1.9 X64 w/SSA
X5 Build 15.2.1.3 X64 w/SSA
X4 Build 14.3.2.2 X64 w/SSA
X3 Build 13.4.2.7 w/SSA
X2 Build 12.6.0.25 w/SSA
X1,V10,V9
Sketch Up Pro 8
AutoCad 2014
Adobe CS6 Design Premium
A Pool Cue , a Harley, a Hammer & a Camera
Good Isn't Enough... When Better is Possible.
-
03-16-2007, 03:41 AM #8
Hi Doug
I got a shock when I put the news on this morning=4" to 8" of snow predicted for today..First they said of it...Other than that doing great.How have things been with you?.........
Allen Colburn Jr.
Pascoag RI 02859
Residential Design Drafting/Framer
Drafter for:
http://www.artformhomeplans.com/
Chief Architect X4
-
03-16-2007, 05:18 AM #9
Hi Allen, yeah I know, we were doing an outside job for the past couple days, IN THE 60's-70's......now this. We have about 1-1/2" so far, I'm about 12mi out of NYC.....so we shouldn't get hit to hard. I hope. Anyway, stay safe......gonna go play in the snow
DougDoug Michel
General Contractor
Design & Build, New Jersey
Windows 7... 64 Bit,
X6 Build 16.1.1.9 X64 w/SSA
X5 Build 15.2.1.3 X64 w/SSA
X4 Build 14.3.2.2 X64 w/SSA
X3 Build 13.4.2.7 w/SSA
X2 Build 12.6.0.25 w/SSA
X1,V10,V9
Sketch Up Pro 8
AutoCad 2014
Adobe CS6 Design Premium
A Pool Cue , a Harley, a Hammer & a Camera
Good Isn't Enough... When Better is Possible.