Protusions

[DougM]

Any Ideas as to what might be causing this, see attatched. I'v tries I think everything to get rid of it, new wall, set the ceiling back down to default height, then moved it up again.....
Thanks for any advise.

Doug

[James Forsberg]

wild guess, but maybe the header of the garage door? Does it goe away if you don't generate framing?

[zoome]

Did you Rebuild Walls/Floors/Ceilings (F12)?

Zoome

[Allen42acj]

Hi Doug
Try glass house view,delete surfaces and the rainbow tool to see what the material is..
If it needs a quick fix,paint it "Open,no material"but that is not a good thing to do for a permanent fix..

[randy120979]

Doug try turning the crown molding off and see if that helps, I had the same problem a while back.

[Cristian-CDD]

I also had a similar problem and in my case I deleted an attic wall (go one level up) - end of "gable wings"

[DougM]

Thanks everyone, Hey Allen, Hows everything? Sooooo....Cristian gets the winning prize. What it was , was a second or should I say a 1st gable(attic wall) Originally the ceiling height was 8'. with that wall being checked as a gable wall. Then I raised the ceiling to 9' and CA created ANOTHER gable (attic) wall. The attic wall that was creating the protrusion was the one from when the ceiling height was at 8'. when I moved it up and hit F12 for rebuild, CA left the original attic wall in place. I deleted the longer of the 2 and all is great.

Thanks everyone for your suggestions.

[Allen42acj]

Hi Doug
I got a shock when I put the news on this morning=4" to 8" of snow predicted for today..First they said of it...Other than that doing great.How have things been with you?

[DougM]

Hi Allen, yeah I know, we were doing an outside job for the past couple days, IN THE 60's-70's......now this. We have about 1-1/2" so far, I'm about 12mi out of NYC.....so we shouldn't get hit to hard. I hope. Anyway, stay safe......gonna go play in the snow
Doug