Results 1 to 3 of 3
Thread: Door/Window Sizes revisited
-
08-24-1999, 09:32 AM #1Registered User Promoted
- Join Date
- Aug 1999
- Location
- Myrtle Beach, SC, USA
- Posts
- 33
Door/Window Sizes revisited
Whenever windows or doors are drawn with another window stacked on top, as in a half round over a twin, the sizes become garbled together.
Does anyone know of a way to get the sizes to show correctly in plan view. The white out method is a good workaround, but it should somehow show properly to start with.
------------------
Dave Gaither
American Bldg. Co.,Inc.
-
08-24-1999, 02:40 PM #2Registered User Promoted
- Join Date
- Aug 1999
- Location
- Vallejo, CA USA
- Posts
- 51
Dave:
I don't think there's any way to display them both. Instead of whiteout you can set the level in the dbx to anything other than default. This will cause the size to stop displaying and will turn the window lines grey. (in plan only)
Matt
-
08-25-1999, 12:44 AM #3Michael Hall, Sequim WA
- Join Date
- Aug 1999
- Location
- SEQUIM WASHINGTON, USA
- Posts
- 391
Yea, Dave. Set the upper window to level 1, (deafault window is level 0). The lower window will show the size, type in the other.
If you want to know how to replicate stacked windows just ask.
Mike Hall - San Diego