Results 1 to 10 of 10
-
06-21-2006, 05:26 AM #1
Registered User Promoted
- Join Date
- May 2006
- Posts
- 23
Resizing the rail & stiles on cabinet doors
I know this must have been asked and answered before, but how do you change the rail and/or stile width of a cabinet door?
Thanks,
Jay
-
06-21-2006, 05:43 AM #2
Draw the door the size you would like them to be.
-
06-21-2006, 05:44 AM #3
Always learning
- Join Date
- Nov 2005
- Location
- Adelaide, Australia
- Posts
- 733
Jay,
Open Cabinet Dbx >Front all the settings are there.Peter Sveinsson
Bathroom Designer, Kitchen Designer, Builder
Adelaide, Australia
email: peter@brilliantsa.com.au
email: (alternative) icy@senet.com.au
Website: www.brilliantsa.com.au
X4 on Windows 7
-
06-21-2006, 05:50 AM #4
Jay,
Don't spend too much time looking for the settings.
-
06-21-2006, 05:59 AM #5
Always learning
- Join Date
- Nov 2005
- Location
- Adelaide, Australia
- Posts
- 733
Louis and Jay,
I might have misunderstood. I took it as meaning rails and stiles around the doors.
In any case, Jay, please clarify what you are after.
PeterPeter Sveinsson
Bathroom Designer, Kitchen Designer, Builder
Adelaide, Australia
email: peter@brilliantsa.com.au
email: (alternative) icy@senet.com.au
Website: www.brilliantsa.com.au
X4 on Windows 7
-
06-21-2006, 08:26 AM #6
Registered User Promoted
- Join Date
- May 2006
- Posts
- 23
Sorry for the confusion. I need to modify the doors not the cabinet. I believe the rails and stiles of the rectangular, framed, simple library doors are 2". I need them to be 2-3/8" on lots of doors. Perhaps a small difference, but on narrow doors the difference can be seen and I want the client to sign-off before making any saw dust.
Is there a way to do this using resizable doors or to copy and modify the library's version?
Thanks,
Jay
-
06-21-2006, 09:43 AM #7
I think you'll have to make your own doors if you want custom rail/stile widths.
It's not hard to do if you know the 3D tools. You should be able to make one door & use stretch planes to resize.
JimThanks, Jim
www.eastbaydesign.net
East Bay Design, Inc
231.331.6102
-
06-21-2006, 01:32 PM #8
Registered User Promoted
- Join Date
- May 2006
- Posts
- 23
Making one and then stretching it is not a big deal, but i guess I would then have to manually place them on each cabinet? Or can I somehow add them to the door library and let the program place them?
Thanks,
Jay
-
06-21-2006, 01:34 PM #9
Jay,
You make it and then bring it through the symbol wizard as a cabinet door.
Tools /symbol/ create symbol.Last edited by louis; 06-21-2006 at 01:43 PM.
-
06-21-2006, 01:52 PM #10
"Or can I somehow add them to the door library and let the program place them?"
Yes.
JimThanks, Jim
www.eastbaydesign.net
East Bay Design, Inc
231.331.6102