Results 1 to 5 of 5
Thread: camera symbol?
-
02-16-2006, 07:54 AM #1Registered User Promoted
- Join Date
- Jul 2005
- Location
- Richardson, Texas
- Posts
- 42
camera symbol?
Does any one know how to cange the camra symbol to no fill transparnt?
-
02-16-2006, 08:11 AM #2
Just turn off the cameras in the layer display dialog box. The cameras do not print.
...or change the camera size in your camera defaults.Last edited by louis; 02-16-2006 at 08:14 AM.
-
02-16-2006, 08:17 AM #3Registered User Promoted
- Join Date
- Jul 2005
- Location
- Richardson, Texas
- Posts
- 42
thanks, i know that i can do that, but when I had 9 they where transparnt. so i was just wanted to know if it could be done in 10.
-
02-16-2006, 08:27 AM #4
The way cameras were drawn in the plan changed from version 9 to 10. In 10, the cameras in plan are actually 3D objects to help show tilt. With this change, the transparency was removed because the fill is doing the hidden surface removal for us (surfaces covered by other surfaces shouldn't be seen).
In short, the cameras in 10 can't be set to transparent.
-
02-16-2006, 12:53 PM #5
...but you can reference your cameras from the project browser.